RE: Stanza gearbox swap options

[Terry Rudd]

If this box is a dogleg then it's most likely from a 180BSSS. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]On Behalf Of Rob P Sent: Friday, 6 February 2004 12:20 AM To: [EMAIL PROTECTED] Subject: Re: Stanza gearbox swap options OK thanks for the tip Mark. I just measured the length of the 510 4-speed and it was 680mm. Then I measured what was supposedley a Stanza 5-speed manual and it was about 760mm - the same as my 240K 5-speed. Measurements taken from bell housing to output end of casing. I assume all the input shafts on L-series gearboxes are the same?   Cheers, Rob P   --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[EMAIL PROTECTED]/ ---------------------------------------------------------------------