It's most likely going to be a stuffed bush. Jack it up and jam a bar behind it and see if it moves when you lever it..
----- Original Message ----- From: "Andrew Greenbury" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, April 05, 2004 7:17 PM Subject: Rear alignment settings > Hi guys, > > Got a wheel alignment done the other day, and they measured the rear > settings as well. The printout is at (apologies for dodgy scan): > http://opax.swin.edu.au/~agreenbury/wheelalign.jpg > > The rear left toe out measurement is troubling at 5.7mm toe out vs only > 0.3mm toe out on the right. Could stuffed A-arm bushes be the cause > of this big difference, or is damage to the actual arm more likely?? The > arms themselves seem beefy especially compared to suspension links > used on modern cars? > > Is the difference in front caster also cause for concern? > > Thanks for any advice, > Andrew > > > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[EMAIL PROTECTED]/ ---------------------------------------------------------------------
