hi, as far as i know , the only thing that was changed was the putting on carby setup. i figure , if i put timing light on, the mark on the balancer would show up on/near the correct timing tag. theres no way the engine would run on the other alignment marks , if it runs on the other ...
mark k ----- Original Message ----- From: "Errol Smith" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, April 07, 2004 9:10 PM Subject: RE: <Unknown Subject> > Depends on which crank pulley you are using as which timing scale you use.. > > Cheers > Feral Errol > Get Serious! http://www.datrats.com.au/ > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of mark krawczuk > Sent: Wednesday, April 07, 2004 8:56 PM > To: [EMAIL PROTECTED] > Subject: <Unknown Subject> > > hi, a friend of mine has a 78 skyline 6cyl auto. i was looking at the > timing tags on the engine and noticed that there are two, one tag has like > a lot of little "teeth" on it plus the 0, 10 20 etc,,, mark sand on the > other side the tag has bigger points on it . > > he also said that the engine was a efi one he got from wreckers, but put > his carby setup on it. > > > why is there 2 tags, and which one do i use???? hmmm i suppose i could > use the timing light to find out which tag the marker lines up > with........ > (just realized that.....) > > > mark k > > > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[EMAIL PROTECTED]/ ---------------------------------------------------------------------
