There is actually an engineering firm in Australia that makes aluminium housings for Datsuns and Triumphs to take 9" Ford centres. Could be big $$$ though.
I am actually becoming a big fan of viscous with oil cooler fitted. Anyone out there had any experiences with them?? -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rick White Sent: Saturday, 10 April 2004 10:41 AM To: [EMAIL PROTECTED] Subject: Re: R180 Diffs These things sound like the Detroit locker, that is in my friends series 2 rx7 with 13B turbo. This detroit locker is inside a custom shortened 9 inch setup. I have only driven it once. Thant was enough. You either drive it hard or not at all. The locker snaps on like nothing I have ever seen before. You can be idoling through a carpark, and all of a sudded the rear end jumps and you are facing the wrong direction. Very scary. Deffinatly something you do nopt want in a daily driver. Rick White. ----- Original Message ----- From: "Brad" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, April 09, 2004 8:06 PM Subject: RE: R180 Diffs > On the money once again my friend > > I had a Quaife style R180 (4.8:1) in the rear of my Group G monster > many, many moons ago. It was sourced through a contact in England who > I used to get TR8 parts from. Anyway, if you didn't drive with 100% > committed acceleration through each corner, the LSD would disengage, > and then re-engage, usually quite violently. > > This of course meant that if you went into a corner which started > tight but opened into a sweeper, as you head in under brakes, LSD not > engaged. Line the nose up and hit the loud pedal and BANG LSD engaged. > Arse hangs out, hold on to her and hope your steering is quick enough > to opposite lock it out of the corner. Great fun until you need to > feather the throttle through the sweeper to hold the slide in that > gear - once you backed off it would disengage and re-engage. To make > a long story short what I am saying is - understeer, oversteer, > understeer, oversteer etc etc. This also caused component failure > both within the diff, and in the universals of the halfshafts. It was > actually really similar to the older detroit lockers. They gave a > spectacular, fun drive, but all that fun cost a lot of time. > > Clutch packs are hard to beat for reliability and predictability. > > Cheers > Brad > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Errol Smith > Sent: Friday, 9 April 2004 4:23 PM > To: [EMAIL PROTECTED] > Subject: RE: R180 Diffs > > > Nissan used a quaife/Torsen style center in their 240RS in 1985? > Apparently they ditched them due to licorice (transverse worm) gear > failures. They also changed the handling characteristics (apparently > unfavourably?). > > I notice the R34 GTR's had one as well (also S15 Silvia). For high > performance applications they seem to go back to clutch pack diffs > again ? > > Any one on list have any personal use comments??? > > Cheers > Feral Errol > Get Serious! http://www.datrats.com.au/ > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Rob P > Sent: Friday, April 09, 2004 2:57 PM > To: [EMAIL PROTECTED] > Subject: Re: R180 Diffs > > The Quaife diff is one of a few (others include Torsen, TrueTrac, Gold > Trac) worm-gear-based torque-biasing differentials - they not only > limit slip, they actively transfer torque to the opposite wheel. This > is very different from most limited-slip or locker diffs. > > Here's a report from a guy who put one in his BMW: > http://staff.connect.com.au/lheather/318ti/1999-02/msg00573.html > > I got one from here: > > Amax Engineering > Factory 6/19 > Edlermaier St > Bayswater Victoria > Phone Max: 0418 485 460 > [EMAIL PROTECTED] > > $1450 AUS dollars +GST > NOTE: This is old info, price or availability may have changed. > > Ther are cheaper LSDs available and the price does not include the > carrier, pinion and ring gear, just the diff centre. If you do get one > tell him Rob from West Australia sent you. > > Cheers, > Rob P > > > ----- Original Message ----- > From: "Mick Ralph" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Friday, April 09, 2004 7:17 AM > Subject: Re: R180 Diffs > > > > Brilliant Pete > > Thanks mate thats exactly what I wanted. > > 4.62 sounds about right. So basically the 720 had 3 different ratios > > in > the > > front? > > I thought they were all 5.1 > > Any thoughts on LSD's? > > Cheers > > Mick > > ----- Original Message ----- > > From: "Peter" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Thursday, April 08, 2004 9:58 PM > > Subject: RE: R180 Diffs > > > > > > > Mick R180 diff ratio are 3.3, 3.54, 3.9, 4.11, 4.38, 4.62, 4.88 & > > > 5.1 3.54 (manual 240K), 3.9(Auto 240k), 4.38 (Import skyline) > > > 4.62, 4.88, 5.11 (720 4WD Front Diff) Hope this helps. > > > > > > > > > -----Original Message----- > > > From: [EMAIL PROTECTED] > > > [mailto:[EMAIL PROTECTED] On Behalf Of Mick > > > Ralph > > > Sent: Wednesday, 7 April 2004 10:35 PM > > > To: [EMAIL PROTECTED] > > > Subject: R180 Diffs > > > > > > I know we have done this a million times before but I really need > > > a list of what AUST models came with what ratio R180 diffs. Also > > > what models had LSD as std or an option > > > The yellow beast loves the roads up here but the 5.1:1 is holding > her > > > back > > > big time. > > > I want something around mid 4's. > > > I got the run of a wreckers yard but short of pulling heaps of > > > them > out > > > .... > > > HELP!! > > > If we get enough info I'll collate it and make a page for the > website... > > > we > > > keep talking about it. > > > Cheers > > > Mick > > > "There is NOTHING sweeter than the howl of the webers in the crisp > > > morning air of the sleepy Numinbah Valley." > > > www.datsun1600.freeservers.com > > > > > > ----- Original Message ----- > > > From: "Errol Smith" <[EMAIL PROTECTED]> > > > To: <[EMAIL PROTECTED]> > > > Sent: Wednesday, April 07, 2004 9:40 PM > > > Subject: RE: <Unknown Subject> > > > > > > > > > > Depends on which crank pulley you are using as which timing > > > > scale you > > > use.. > > > > > > > > Cheers > > > > Feral Errol > > > > Get Serious! http://www.datrats.com.au/ > > > > > > > > -----Original Message----- > > > > From: [EMAIL PROTECTED] > > > > [mailto:[EMAIL PROTECTED] Behalf Of mark > > > krawczuk > > > > Sent: Wednesday, April 07, 2004 8:56 PM > > > > To: [EMAIL PROTECTED] > > > > Subject: <Unknown Subject> > > > > > > > > hi, a friend of mine has a 78 skyline 6cyl auto. i was > > > > looking at > > > the > > > > timing tags on the engine and noticed that there are two, one > tag > > > has > > > like > > > > a lot of little "teeth" on it plus the 0, 10 20 etc,,, mark > > > > sand on > > > the > > > > other side the tag has bigger points on it . > > > > > > > > he also said that the engine was a efi one he got from wreckers, > > > > but > > > put > > > > his carby setup on it. > > > > > > > > > > > > why is there 2 tags, and which one do i use???? hmmm i > > > > suppose i > > > could > > > > use the timing light to find out which tag the marker lines > > > > up with........ (just realized that.....) > > > > > > > > > > > > mark k > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --membersozdat------------------------------------------------------- > OZDAT Mailing List Please Note:- > Send (un)subscribe requests to [EMAIL PROTECTED] Send > submissions to [EMAIL PROTECTED] No unauthorised > redistribution of this email > http://www.ozdat.com/ozdatonline/index.htm > http://www.ozdat.com/ozdatonline/listindex.html > http://www.mail-archive.com/[EMAIL PROTECTED]/ > --------------------------------------------------------------------- > > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[EMAIL PROTECTED]/ --------------------------------------------------------------------- --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[EMAIL PROTECTED]/ ---------------------------------------------------------------------
