Hi Andrew, I may have missed it, but did you say which car you got the EFI system from? I am just chasing the computer as I already have the manifold, injectors etc.
Cheers, Rob P ----- Original Message ----- From: "Andrew Greenbury" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, April 19, 2004 9:35 AM Subject: Re: R180 Diffs - Andrew G > Hi Mick, > > Yeah I reckon the factory EFI system is pretty good. I DIDhave it > running very well, more economical, better driveability, revving cleaner, > but found that it had a vacuum leak at the manifold to head interface. > So I thought that once fixed it should run even better. However now its > fixed and has no leaks its running far worse, and comparable to the old > 32/36 downdraft weber setup :( > > So now it seems to be defying logic and its a case of playing around > with settings to try and get it running back to its former self :) > Andrew > > > Hi Andrew > > How does the EFI system stack up do u think? > > Is it more economical? More power? Wider rev range? > > I'm really impressed with the system on the Pintara (r31). Its not exactly a > > powerhouse but it sure is cheap to run. > > The main problem with the diffs was (a) Viscous style not clutch pack (b) No > > idea of condition (c) Not cheap (d) The carriers were bloody hopeless and > > indicated that with the extra weight it would be very exxy to ship. It was > > just not worth it. I figured I could source some here far easier. I haven't > > been looking too hard but I have seen a few advertised. > > Cheers > > Mick > > > > > > ----- Original Message ----- > > From: "Andrew Greenbury" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Friday, April 16, 2004 9:58 AM > > Subject: Re: R180 Diffs - Andrew G > > > > > > > Hi Mick, > > > > > > Yeah my project is going along ok thanks. Recently got the L18EFI > > > setup working, but now its a process of getting it to run nicely (or at > > > least more nicely). So you guys didn't get any LSDs in?? What was the > > > problem? > > > > > > Hope you and everyone had a great easter too, > > > Andrew > > > > > > > Hi ya Andrew > > > > Yeah I been a bit quiet on the list of late. I am building a house and > > > > running a new small business as well as my old job coaching.... > > > > No chance of doing anything serious with the Datto this year but with > > the > > > > roads I got at my front door now at least I can go for a blast every now > > and > > > > then. > > > > Actually the road into Nerang from here is about 30kms of the best road > > in > > > > the Gold Coast hinterland so its just made for the Datto. Unfortunately > > I > > > > had to lower my colours to a skyline the other day cos I topped out on > > one > > > > of the straight sections (theres only 2!!). I was hammering him all the > > way > > > > until he just zoomed past me. The 5.1 is a great diff for the track > > > > especially with the closer ratios in the gearbox but it cuts down the > > top > > > > speeds considerably. > > > > The diffs were very difficult to get from OS. Rizal really played hard > > to > > > > get over them. It just got too hard. > > > > An LSD is about all I need to finish my project I reckon, but I know > > realise > > > > why so many people sell or just stop their projects when they start > > building > > > > a house!!! > > > > I keep reading the list tho and its still a source of great interest and > > > > amusement. > > > > You sound like you are getting stuck into it too. How is your beast? > > > > Sorting out the front end to get them to steer and turn in is about the > > best > > > > thing you can do to a Datto I reckon. I've yet to see it done properly > > > > without lengthening the control arms, pulling them right forward with > > > > adjustable caster bars and getting the right spring/ride height. I'm not > > > > sure of the actual numbers (SOB who forgot to write them down) but > > basically > > > > the front wheels should look like they are leaning in at the top, the > > inside > > > > flange on the lower control arms should be filed/side-grounded? to allow > > > > them to come further forward where they would normally hit the front > > cross > > > > member and the ride height should be not so low as to produce bump > > steer. > > > > The best set ups I have used have come from the info from this list > > > > Well I got to go do another diff now . First time I have blown a diff > > > > without doing wheeelies GRRRRR. The poor old Rodeo finally quit from > > the > > > > weight hahaha. > > > > Have a SAFE and Happy Easter Andrew and all my mates on OZDAT > > > > Cheers > > > > Mick > > > > > > > > ----- Original Message ----- > > > > From: "Andrew Greenbury" <[EMAIL PROTECTED]> > > > > To: <[EMAIL PROTECTED]> > > > > Sent: Thursday, April 08, 2004 11:06 AM > > > > Subject: Re: R180 Diffs > > > > > > > > > > > > > Gday Mick, > > > > > > > > > > We havent heard from you for a while hope everything is well. I > > thought > > > > > you were getting some R180 LSDs from OS?? > > > > > > > > > > Andrew > > > > > > > > > > > I know we have done this a million times before but I really need a > > list > > > > of > > > > > > what AUST models came with what ratio R180 diffs. Also what models > > had > > > > LSD > > > > > > as std or an option > > > > > > The yellow beast loves the roads up here but the 5.1:1 is holding > > her > > > > back > > > > > > big time. > > > > > > I want something around mid 4's. > > > > > > I got the run of a wreckers yard but short of pulling heaps of them > > out > > > > .... > > > > > > HELP!! > > > > > > If we get enough info I'll collate it and make a page for the > > website... > > > > we > > > > > > keep talking about it. > > > > > > Cheers > > > > > > Mick > > > > > > "There is NOTHING sweeter than the howl of the webers in the crisp > > > > morning > > > > > > air of the sleepy Numinbah Valley." > > > > > > www.datsun1600.freeservers.com > > > > > > > > > > > > > > > > > > > > ________________________________________________________________ > > $0 Bannerless Web Hosting, 10 POP and Web Email Accounts, & more > > Get It Now At www.doteasy.com > > > > > > > > > > > > > > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[EMAIL PROTECTED]/ ---------------------------------------------------------------------
