28-32 total is normal for L20B's with big cams (290+ duration) depending on static comp ratio. Higher comp = less total advance.
Cheers Feral Errol Get Serious! http://www.datrats.com.au/ -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Cleary Signs Sent: Tuesday, April 20, 2004 12:30 PM To: [EMAIL PROTECTED] Subject: Re: Dizzy i used to set my L18 (76 deg cam) at 32 deg total advance. which i think it was around 15 deg at idle, this was with a bosch elect dist (not a BB2 type) curved to suit cam. heath ----- Original Message ----- From: "Errol Smith" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, April 20, 2004 9:38 AM Subject: RE: Dizzy > Your timing should be set to ensure maximum cylinder pressure is reached > with the crank at maximum crank angle. If this condition is maintained at > all engine speeds this will give maximum torque through the rev range. > > > Cheers > Feral Errol > Get Serious! http://www.datrats.com.au/ > > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[EMAIL PROTECTED]/ ---------------------------------------------------------------------
