Hi Rob, Further to my other post, the Bosch single wire sensor you mentioned suitable for an L series 4 cylinder is no good for measuring air fuel ratios for tuning. Some of the factory L series EFI systems had closed loop control and the sensor is for this.
Andrew > Hi all, > I want to set up my L4 powered 1600 with a cheap O2 sensor and A/F ratio meter. > Is there anything I need to know? I see heaps of cheap O2 sensors on Ebay, brand new > starting at around AUS$30-$40. There is a Bosch #11051 (OE type before catalyst > single wire) O2 sensor listed as suitable for an L-series 4-cylinder. Are these any > good? I'm just running twin SU's on one car with an L18 and twin Weber 45's on another with a L20B and want to swap between them for tuning. I thought I'd just get a Jaycar LED A/F meter kit and DIY it. > I should be able to put the whole thing together for less than $150 I reckon. > Any thoughts? > > Cheers, > Rob P > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[EMAIL PROTECTED]/ ---------------------------------------------------------------------
