So when I go to put it back together I do need to use new bolts? I
wondered about that.
Peter Frederick wrote:
Yes, it does. Center out, as always, to avoid trapping stresses.
Actual sequence depends on the gasket. Some are two torque steps,
some are a single torque step and then two 90 degree turns, with a 10
min settling time between. That was the case on the 603, anyway. Use
new bolts, too -- cheaper than another head gasket set when they don't
hold and it blows again.
you would loosen the bolts from the ends of the cylinder head to the
center.
Peter
_______________________________________
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.409 / Virus Database: 270.13.64/2319 - Release Date: 08/22/09 06:06:00
--
Kaleb C. Striplin/Claremore, OK
95 E300, 92 500SEL, 92 300SD, 92 300E 4Matic, 91 300D, 91 300E,
89 560SEL, 87 300SDL x2, 85 380SE 5.0 Euro, 85 190D, 84 190D,
84 300D euro manny, 81 240D, 80 240D, 76 240D, 76 300D,
http://www.okiebenz.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://okiebenz.com/pipermail/mercedes_okiebenz.com/attachments/20090822/e1ac0dda/attachment.html>
_______________________________________
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
