I have trouble visualizing the "banjo" part...
On 12/11/05, Peter Frederick <[EMAIL PROTECTED]> wrote: > > A "banjo bolt" is a hollow bolt that has a banjo shaped fitting under > it with a hose of some type sticking out at a right angle. Hard to > miss. > > Size depends on application -- the one for the turbo will be a 15 or > 17, I'd guess. The ones on the IP are 17s if I remember correctly, and > you must be careful, the inlet and outlet bolts are NOT the same -- the > outlet has a very small hole in it and acts to pressurize the IP. If > you swap them, the engine won't run. > > Peter > > > _______________________________________ > For new parts see official list sponsor: http://www.buymbparts.com/ > For used parts email [EMAIL PROTECTED] > > To Unsubscribe or change delivery options go to: > http://striplin.net/mailman/listinfo/mercedes_striplin.net >