I've just built an image for the i.MX6DL/RIoTboard using the latest master (fido). I had to add this line to local.conf: MACHINE_EXTRA_RRECOMMENDS_remove_imx6dl-riotboard = "fsl-alsa-plugins" as the fsl-alsa-plugins won't currently build with Linux-4.0
Now I'm trying to boot the image. I've copied it to my SD card and set the switches appropriately (I found two web pages about this and they have conflicting information! The answer seems to be SW1-SW8=On/Off/On/Off/Off/On/Off/On) I get the U-Boot prompt from the image I built (it has today's date), but the SD card doesn't boot from there. The default boot commands seem to be looking for boot scripts, etc, but there are none on the SD card, only a zImage and DTB file. Is there some documentation, perhaps in meta-fsl-arm-extra, that helps (and I've missed)?? Any help on how to boot this board would be appreciated. -- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------ -- _______________________________________________ meta-freescale mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-freescale
