Hello Nikolay and Gary, On Wed, Apr 22, 2015 at 9:22 PM, Nikolay Dimitrov <[email protected]> wrote: > On 04/23/2015 03:18 AM, Nikolay Dimitrov wrote: >> On 04/23/2015 12:37 AM, Gary Thomas wrote: >>> >>> I've just built an image for the i.MX6DL/RIoTboard using the latest >>> master (fido). I had to add this line to local.conf: >>> MACHINE_EXTRA_RRECOMMENDS_remove_imx6dl-riotboard = >>> "fsl-alsa-plugins" as the fsl-alsa-plugins won't currently build with >>> Linux-4.0 >>> >>> Now I'm trying to boot the image. I've copied it to my SD card and >>> set the switches appropriately (I found two web pages about this and >>> they have conflicting information! The answer seems to be >>> SW1-SW8=On/Off/On/Off/Off/On/Off/On) >> >> >> I have 2 riotboards both booting from sdcards, here are their >> configurations: >> - slot J6 (USDHC2), SW1-8 = On/Off/On/Off/Off/On/On/Off >> - slot J7 (USDHC3), SW1-8 = On/Off/On/Off/Off/On/Off/On >> >>> I get the U-Boot prompt from the image I built (it has today's date), >>> but the SD card doesn't boot from there. The default boot commands >>> seem to be looking for boot scripts, etc, but there are none on the >>> SD card, only a zImage and DTB file. >>> >>> Is there some documentation, perhaps in meta-fsl-arm-extra, that >>> helps (and I've missed)?? >>> >>> Any help on how to boot this board would be appreciated. >> >> >> Fido uses U-Boot v2015.04. Assuming that you haven't modifed the >> upstream version, v2015.04 uses extlinux boot mechanism, which requires >> the following files to be available on your boot partition: >> >> /boot/extlinux/extlinux.conf >> /boot/imx6dl-riotboard.dtb >> /boot/uImage >> >> Extlinux.conf should have the following content: >> >> default yocto >> label yocto >> kernel /boot/uImage >> devicetree /boot/imx6dl-riotboard.dtb >> append console=ttymxc1,115200 root=/dev/mmcblk0p1 rw > > > Of course, change root= to suit your configuration.
I have reverted the conversion of the board for now. This should make it work out of box until we add support for the generic script. I will be sending those patches in some minutes and include them in master-next for testing. -- Otavio Salvador O.S. Systems http://www.ossystems.com.br http://code.ossystems.com.br Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750 -- _______________________________________________ meta-freescale mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-freescale
