On Wed, Apr 22, 2015 at 10:28 PM, Otavio Salvador <[email protected]> wrote: > Hello Nikolay and Gary, > > On Wed, Apr 22, 2015 at 9:22 PM, Nikolay Dimitrov <[email protected]> wrote: >> On 04/23/2015 03:18 AM, Nikolay Dimitrov wrote: >>> On 04/23/2015 12:37 AM, Gary Thomas wrote: >>>> >>>> I've just built an image for the i.MX6DL/RIoTboard using the latest >>>> master (fido). I had to add this line to local.conf: >>>> MACHINE_EXTRA_RRECOMMENDS_remove_imx6dl-riotboard = >>>> "fsl-alsa-plugins" as the fsl-alsa-plugins won't currently build with >>>> Linux-4.0 >>>> >>>> Now I'm trying to boot the image. I've copied it to my SD card and >>>> set the switches appropriately (I found two web pages about this and >>>> they have conflicting information! The answer seems to be >>>> SW1-SW8=On/Off/On/Off/Off/On/Off/On) >>> >>> >>> I have 2 riotboards both booting from sdcards, here are their >>> configurations: >>> - slot J6 (USDHC2), SW1-8 = On/Off/On/Off/Off/On/On/Off >>> - slot J7 (USDHC3), SW1-8 = On/Off/On/Off/Off/On/Off/On >>> >>>> I get the U-Boot prompt from the image I built (it has today's date), >>>> but the SD card doesn't boot from there. The default boot commands >>>> seem to be looking for boot scripts, etc, but there are none on the >>>> SD card, only a zImage and DTB file. >>>> >>>> Is there some documentation, perhaps in meta-fsl-arm-extra, that >>>> helps (and I've missed)?? >>>> >>>> Any help on how to boot this board would be appreciated. >>> >>> >>> Fido uses U-Boot v2015.04. Assuming that you haven't modifed the >>> upstream version, v2015.04 uses extlinux boot mechanism, which requires >>> the following files to be available on your boot partition: >>> >>> /boot/extlinux/extlinux.conf >>> /boot/imx6dl-riotboard.dtb >>> /boot/uImage >>> >>> Extlinux.conf should have the following content: >>> >>> default yocto >>> label yocto >>> kernel /boot/uImage >>> devicetree /boot/imx6dl-riotboard.dtb >>> append console=ttymxc1,115200 root=/dev/mmcblk0p1 rw >> >> >> Of course, change root= to suit your configuration. > > I have reverted the conversion of the board for now. This should make > it work out of box until we add support for the generic script. > > I will be sending those patches in some minutes and include them in > master-next for testing.
Otavio, unfortunately I don't have access to this board anymore, so I'm not going to be able to test it I would appreciate if someone else could become the RioT board mantainer. Daiane > > -- > Otavio Salvador O.S. Systems > http://www.ossystems.com.br http://code.ossystems.com.br > Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750 > -- > _______________________________________________ > meta-freescale mailing list > [email protected] > https://lists.yoctoproject.org/listinfo/meta-freescale -- _______________________________________________ meta-freescale mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-freescale
