On Thu, Apr 23, 2015 at 9:32 AM, Nikolay Dimitrov <[email protected]> wrote: > Hi Otavio, > > > On 04/23/2015 03:21 PM, Otavio Salvador wrote: >> >> On Thu, Apr 23, 2015 at 9:19 AM, Daiane Angolini <[email protected]> >> wrote: >>> >>> On Wed, Apr 22, 2015 at 10:28 PM, Otavio Salvador >>> <[email protected]> wrote: >>>> >>>> Hello Nikolay and Gary, >>>> >>>> On Wed, Apr 22, 2015 at 9:22 PM, Nikolay Dimitrov <[email protected]> >>>> wrote: >>>>> >>>>> On 04/23/2015 03:18 AM, Nikolay Dimitrov wrote: >>>>>> >>>>>> On 04/23/2015 12:37 AM, Gary Thomas wrote: >>>>>>> >>>>>>> >>>>>>> I've just built an image for the i.MX6DL/RIoTboard using the latest >>>>>>> master (fido). I had to add this line to local.conf: >>>>>>> MACHINE_EXTRA_RRECOMMENDS_remove_imx6dl-riotboard = >>>>>>> "fsl-alsa-plugins" as the fsl-alsa-plugins won't currently build with >>>>>>> Linux-4.0 >>>>>>> >>>>>>> Now I'm trying to boot the image. I've copied it to my SD card and >>>>>>> set the switches appropriately (I found two web pages about this and >>>>>>> they have conflicting information! The answer seems to be >>>>>>> SW1-SW8=On/Off/On/Off/Off/On/Off/On) >>>>>> >>>>>> >>>>>> >>>>>> I have 2 riotboards both booting from sdcards, here are their >>>>>> configurations: >>>>>> - slot J6 (USDHC2), SW1-8 = On/Off/On/Off/Off/On/On/Off >>>>>> - slot J7 (USDHC3), SW1-8 = On/Off/On/Off/Off/On/Off/On >>>>>> >>>>>>> I get the U-Boot prompt from the image I built (it has today's date), >>>>>>> but the SD card doesn't boot from there. The default boot commands >>>>>>> seem to be looking for boot scripts, etc, but there are none on the >>>>>>> SD card, only a zImage and DTB file. >>>>>>> >>>>>>> Is there some documentation, perhaps in meta-fsl-arm-extra, that >>>>>>> helps (and I've missed)?? >>>>>>> >>>>>>> Any help on how to boot this board would be appreciated. >>>>>> >>>>>> >>>>>> >>>>>> Fido uses U-Boot v2015.04. Assuming that you haven't modifed the >>>>>> upstream version, v2015.04 uses extlinux boot mechanism, which >>>>>> requires >>>>>> the following files to be available on your boot partition: >>>>>> >>>>>> /boot/extlinux/extlinux.conf >>>>>> /boot/imx6dl-riotboard.dtb >>>>>> /boot/uImage >>>>>> >>>>>> Extlinux.conf should have the following content: >>>>>> >>>>>> default yocto >>>>>> label yocto >>>>>> kernel /boot/uImage >>>>>> devicetree /boot/imx6dl-riotboard.dtb >>>>>> append console=ttymxc1,115200 root=/dev/mmcblk0p1 rw >>>>> >>>>> >>>>> >>>>> Of course, change root= to suit your configuration. >>>> >>>> >>>> I have reverted the conversion of the board for now. This should make >>>> it work out of box until we add support for the generic script. >>>> >>>> I will be sending those patches in some minutes and include them in >>>> master-next for testing. >>> >>> >>> Otavio, unfortunately I don't have access to this board anymore, so >>> I'm not going to be able to test it >>> >>> I would appreciate if someone else could become the RioT board mantainer. >> >> >> Thanks for letting us know. Gary, Nikolay? Anyone? > > > I can volunteer.
Thanks a lot. Please, send a patch replacing my name by yours ;) Otavio, can this change be included in fido as well? Daiane > > Regards, > Nikolay -- _______________________________________________ meta-freescale mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-freescale
