On 21-03-17 15:24, Jean-Francois Dagenais wrote:
Kind regards,
Mike Looijmans
System Expert
TOPIC Products
Materiaalweg 4, NL-5681 RJ Best
Postbus 440, NL-5680 AK Best
Telefoon: +31 (0) 499 33 69 79
E-mail: [email protected]
Website: www.topicproducts.com
Please consider the environment before printing this e-mail
On Mar 21, 2017, at 04:59, Michal Simek <[email protected]> wrote:
You need pmufw with configuration blob in it. Or pass it. This option is
not supported now that's why it is not working.
I don't understand any of this... "configuration blob"? This is new to me.
Not sure what's the plan to fix this.
Well, zcu102 may have worked for a while, but now this is totally broken in
meta-xilinx.
Right now I can run it because I have got some internal patches to
include configuration blob for pmufw but not sure if/when this will be
pushed out.
It was my decision to check pmufw version because so many people were
using older/ancient pmufw which missed a lot of important features
that's why we enforced version checking.
If you were able to make things work with this check for >= 0.3, then you must
have it. Can you make it unofficially available somewhere? Or do we need some
sort of early-access license to access it. Because right now, as I said, this is
totally unusable.
You should use fsbl which contain all stuff you need. SPL is not
officially supported boot solution.
Problem with this is that FSBL requires Vivado and the licensing. These tools
don't integrate well in a CI build environment. Since they don't change often,
I'll probably have to go down that road for now. Can I get away with just
building FSBL (boot.bin) from the Vivado tools, integrate this file as a binary
asset in my sdcard, then jump to the u-boot.img built using yocto and
meta-xilinx?
Yes, that's what I do currently to get the board to boot properly.
To get a bit acceptable boot time I put the boot.bin into the dual QSPI flash
(just write boot.bin to the start of the MTD device) and then continue booting
from a openembedded built SD card.
Booting works somewhat okay with the 4.6 kernel and without pmufw. Other
combinations thus far have failed (e.g. loading pmufw breaks the SD card on
4.6, and 4.9 kernel I cannot get to compile yet).
--
_______________________________________________
meta-xilinx mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/meta-xilinx
