[mfg-smartcam] Repeat quesions......

[Fairway Fatty]

Greetings Group......This is my 3rd attempt to post this so other post may trickle in on same topic.  A few questions addressed in the past but dont recall the answers and hopefully someone will rememeber..   Im a FreeForm and PTurn user and have purchased FeatureCam but havent had achance to do anythiing with it...anyway   1) How to make printed graphic view from FreeForm have heavier lines?   2) How to take a screenshot of showcut and cut/paste to Word?   3)  I at times have trouble snapping to an element when in Order Path, Prof Start...... I have to snap up down all around the element repeatedly before it finally grabs it......any ides?     Now I'd like to ask for some helpful hints and ideas for Milling TITANUM.......  I have a very detailed grid to machine from 10" x 10" x 3/4" TI 6AL 4V Specifically .082 wide x .300 deep end milled slots,  multiple arbitrary shaped pockets .600 deep with .062 and .125 corner rads,  Drilled, tapped and reamed holes.    Recommended Tooling....Carbide brand etc....    Speed,  Feed, depth of cut when milling, drilling reaming etc...   I know this is a tall order but any of you guys in Aerospace or other specialties may know what i mean.     Thanks for any help,  Regards Fairway   Also Ernie, Paul, Number one if you are out there i lost your e-mail address