Bob, I did that. I did forget that I am running Aturn v11.5, though, and the t-inch.def is kind of hard to read, but I found the spot drill section. Now, my next question is, where do I go to make it default to RPM not to feed/min. I did notice on other sections that thre is a spmode=1 or 2, but not in the drilling sections. I tried to add one, but nothing changed. I restarted smartcam, and still nothing.
the spot drill section
tool = -2010201
[
ccw = "0"
descrip = ""
graphics = ""
n_flutes = "2"
section = "2010201"
tipangl = "90"
tl_dia = "0.5"
tl_len = "2*JOS(tl_dia)"
tl_mat = "0"
user_desc = ""
user_name = ""
]
Thanks for all your help. Rick
-----Original Message-----
From: Bob Looney [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, June 20, 2001 11:26 AM
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: RE: [mfg-smartcam] Planner defaults
look in /josdef/m_inch.def. you can also edit a custom version and point to
it from the app ini file.
my ffm.ini section:
[Inch]
JosDefaults=..\shared\custom\V10.DEF
AutoId=..\shared\custom\v10ID.FMT
AutoDescription=..\shared\custom\v10DSC.FMT
bob
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Stannard, Rick
Sent: Wednesday, June 20, 2001 10:51 AM
To: [EMAIL PROTECTED]
Subject: [mfg-smartcam] Planner defaults
Hi all,
I remember somewhere in the past, someone told how to change the defaults
in the job planner. I am sure it was a different version, but I have
forgotten, anyway. I would like for the speed mode to be RPM not feet/min.
Where do I change this?
Thank you,
Rick Stannard
SR. CNC Programmer
Fairchild Fasteners, South Bay
3000 W. Lomita Blvd
Torrance, CA. 90505
Ph. (310)784-4394
cell (310)938-8431
[EMAIL PROTECTED]
www.fairchildfasteners.com
======================================================================
To find out more about this mailing list including how to unsubscribe,
send the message "info mfg-smartcam" to [EMAIL PROTECTED]
======================================================================
Title: RE: [mfg-smartcam] Planner defaults
Bob, I did that. I did forget that I am running Aturn v11.5, though, and the t-inch.def is kind of hard to read, but I found the spot drill section. Now, my next question is, where do I go to make it default to RPM not to feed/min. I did notice on other sections that thre is a spmode=1 or 2, but not in the drilling sections. I tried to add one, but nothing changed. I restarted smartcam, and still nothing.
the spot drill section
tool = -2010201
[
ccw = "0"
descrip = ""
graphics = ""
n_flutes = "2"
section = "2010201"
tipangl = "90"
tl_dia = "0.5"
tl_len = "2*JOS(tl_dia)"
tl_mat = "0"
user_desc = ""
user_name = ""
]
Thanks for all your help. Rick
-----Original Message-----
From: Bob Looney [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, June 20, 2001 11:26 AM
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: RE: [mfg-smartcam] Planner defaults
look in /josdef/m_inch.def. you can also edit a custom version and point to
it from the app ini file.
my ffm.ini section:
[Inch]
JosDefaults=..\shared\custom\V10.DEF
AutoId=..\shared\custom\v10ID.FMT
AutoDescription=..\shared\custom\v10DSC.FMT
bob
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Stannard, Rick
Sent: Wednesday, June 20, 2001 10:51 AM
To: [EMAIL PROTECTED]
Subject: [mfg-smartcam] Planner defaults
Hi all,
I remember somewhere in the past, someone told how to change the defaults
in the job planner. I am sure it was a different version, but I have
forgotten, anyway. I would like for the speed mode to be RPM not feet/min.
Where do I change this?
Thank you,
Rick Stannard
SR. CNC Programmer
Fairchild Fasteners, South Bay
3000 W. Lomita Blvd
Torrance, CA. 90505
Ph. (310)784-4394
cell (310)938-8431
[EMAIL PROTECTED]
www.fairchildfasteners.com
======================================================================
To find out more about this mailing list including how to unsubscribe,
send the message "info mfg-smartcam" to [EMAIL PROTECTED]
======================================================================
