Re: [mfg-smartcam] Planner defaults

[Brewertr]

A copy from my JOF file that works, Drill Aturn V11.5
I have highlighted areas that I feel may possibly effect you.


This is at the beginning of my JOF file step information


step = 9
[
   descrip = "DRILL"
   doff = "JOS(tl_num)"
   fdmode = "1"
   loff = "JOS(tl_num)"
   notes = "DRILL"
   op = "9"
   section = "5020101"
   spmode = "2"
   tool_assignment = "9"
   user_name = "6"
]

This is towards the middle of the file  tool information

tool = 9
[
   ccw = "0"
   descrip = "L 0.387 dia. Fixed Twist Drill"
   geometry = "0"
   graphics = ""
   n_flutes = "2"
   section = "2010202"
   tipangl = "118"
   tl_dia = ".387"
   tl_len = "4.5"
   tl_mat = "0"
   user_desc = ""
   user_name = "Fixed Twist Drill.9"
]


This is at the end of the file  operation information

op = 9
[
   coolant = "1"
   cycle = "0"
   descrip = "Drilling"
   dwellsec = ".2"
   feedupr = ".003", "upr"
   section = "1030202"
   speedcss = "60", "supm"
   user_name = "Drilling.9"
]

Tom