Rick, Here's an addendum to my previous email. I just noticed that technote 131 doesn't mention that the t_inch.def and t_metric.def files contains "3" step sections used by Advanced Turning.
step = -5020101 // Milling/Rotating Tool Hole Step
step = -5020201 // Turning Tool Step
step = -5020202 // Grooving Tool Step
The section in each file you need to edit is 5020201 for turning steps.
step = -5020201
[
// Turning Tool Step
section = "5020201"
descrip = ""
doff = "JOS(tl_num)"
loff = "JOS(tl_num)"
fdmode = "2"
spmode = "2"
notes = ""
op = ""
tool_assignment = ""
user_name = ""
refdia = "1.0"
]
-----Original Message-----
From: Lauzus, Frederick [mailto:[EMAIL PROTECTED]]
Sent: Thursday, June 21, 2001 7:26 AM
To: Stannard, Rick; [EMAIL PROTECTED]
Subject: RE: [mfg-smartcam] Planner defaults
Rick,
See attached technote 131
=============================================
Fred Lauzus, CAM Programming Coordinator
High Steel Structures, Incorporated
mailto:[EMAIL PROTECTED] http://www.highsteel.com
=============================================
-----Original Message-----
From: Stannard, Rick [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, June 20, 2001 1:51 PM
To: [EMAIL PROTECTED]
Subject: [mfg-smartcam] Planner defaults
Hi all,
I remember somewhere in the past, someone told how to change the defaults
in the job planner. I am sure it was a different version, but I have
forgotten, anyway. I would like for the speed mode to be RPM not feet/min.
Where do I change this?
Thank you,
Rick Stannard
SR. CNC Programmer
Fairchild Fasteners, South Bay
3000 W. Lomita Blvd
Torrance, CA. 90505
Ph. (310)784-4394
cell (310)938-8431
[EMAIL PROTECTED]
www.fairchildfasteners.com
tech131.htm
Description: Binary data
