Re: [mfg-smartcam] CUTTER COMP.

[Dave Coupar]

Title: Untitled Stationery

Colin,   Are you using Lead-In/Out to add a 0.375 x 90 degree line at the start of the slot? If not, SmartCAM is probably doing it's Auto Lead-In from the SMF file.   Dave ----- Original Message ----- From: Williams, Colin To: Smartcam Forum (E-mail) Sent: Monday, March 04, 2002 9:03 AM Subject: [mfg-smartcam] CUTTER COMP. I need to program a slot that is 1.67 long and .75 wide using a 1/2 dia. endmill. I would to plunge at one end of the slot and in the center then go around the slot. When I use the cutter comp., it looks like the tool is being offset and starting off center.   Thank you Colin Williams WABTEC CORPORATION CONFIDENTIALITY NOTE The content contained in this e-mail transmission is legally privileged and confidential information intended only for the use of the individual or entity named herein. If the reader of this transmission is not the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this transmission is strictly prohibited.