RE: [mfg-smartcam] tool holders

[Ernie Gemmel]

Title: Message

By the way, this type of thing is usually indicative of spindles that have done a little too much jack- hammering on the vise, if you know what i mean ...   -ernie         -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of [EMAIL PROTECTED] Sent: November 7, 2002 10:35 AM To: [EMAIL PROTECTED]; [EMAIL PROTECTED] Subject: RE: [mfg-smartcam] tool holders William,   We have a Fadal 40 taper and the roughing tools always bang when releasing. Sometimes it actually sends the machine into an error and has to be re-initialized. We have tried oils, cleaning the tapers. I'm not sure why it happens, but it is a problem for us also     Jim -----Original Message----- From: Ray Machine Inc. [mailto:[EMAIL PROTECTED]] Sent: Thursday, November 07, 2002 9:45 AM To: SmartCam Fourm Subject: [mfg-smartcam] tool holders Hi All,   Does anyone have problems with tool holders sticking in the spindle? We have a SuperMax Max 7 with a BT-50 taper spindle and the tools stick in the spindle and its hard on the tool changer. I have cleaned it and oiled it and nothing seems to help.   By the way Thanks for the help with the Plywood job.   Thanks William