Perfect! I like the cell-phone mount, too. ;-) --Jerry
On 5/15/08, Matt Yates <[EMAIL PROTECTED]> wrote: > > AEM makes a 4" filter you can either stick on the turbo or an elbow. > http://gallery.y8s.com/miata/turbo/DSC02751.JPG.html > > (bigger is better) > > > About to buy a GT2871R (part# 743347-2) off the miata.net classifieds ( > > > http://www.miata.net/cgi-bin/isc/classifieds.cgi?action=detail&AdNumber=70989&CategoryID=113&SubID=1085&Position=24&TotalCount=24&Session=482c90314d4f7d59&FirstPage=20&LastPage=24&prevaction=show > ) > > > > > > Looks like this will bolt up to the FM manifold, and the sizing is > > appropriate with some headroom, but according to Garrett ( > > > http://www.turbobygarrett.com/turbobygarrett/catelog/Turbochargers/GT28/GT2871R_743347_2.htm)theinlet > > is bigger than the old FM kit turbo (4" vs. 2.75") so I'll just have > > to figure out a new intake. > > > > Anything I'm missing? > > > > -Jerry > > > > On 3/19/08, Bob Bundy <[EMAIL PROTECTED]> wrote: > >> > >> I'm pretty sure the GT3071R will spool as good if not better than a > >> GT2860RS. Both come in versions with T2 style turbine inlets that bolt > >> up > >> to > >> the FM manifold. On my 2.0l the GT3071R spools much faster than the > >> GT2560R > >> ever did on my 1.6l. The only problem I had was boost creep initially > >> with > >> the internal waste gate version. I could remove the actuator rod and > >> safety > >> wire the waste gate wide open and it would still want to make over 20psi > >> up > >> top. I ported the waste gate and can keep it a stable 12 psi now with > >> the > >> cat in, 14 psi without cat. > >> > >> Bob > >> > >> > >> > >> ----- Original Message ----- > >> From: <[EMAIL PROTECTED]> > >> To: <[EMAIL PROTECTED]> > >> Cc: <[email protected]> > >> Sent: Tuesday, March 18, 2008 2:21 PM > >> Subject: Re: 300whp street '97 1.8L build > >> > >> > >> > On Mar 18, 2008 "Stephanie Turner" wrote: > >> >> Any Turbo starting n GT25 or GT28 should fit. We can also re-machine > >> that > >> > ... > >> >> ability of both turbos. But several customers have ordered them. The > >> >> 3071 > >> >> would have much slower spool up for a lower boost application, so you > >> >> might > >> > > >> > So does a GT3071 fit on a GT25/GT28 manifold? Do other GT30xx turbos? > >> > Or is Garrett's naming convention just broken (again?). > >> > > >> > --Ian > >> > _______________________________________________ > >> > Miatapower mailing list > >> > [email protected] > >> > http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower > >> > >> _______________________________________________ > >> Miatapower mailing list > >> [email protected] > >> http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower > >> > > _______________________________________________ > > Miatapower mailing list > > [email protected] > > http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower > > > >
_______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
