I'm pretty sure the GT3071R will spool as good if not better than a GT2860RS. Both come in versions with T2 style turbine inlets that bolt up to the FM manifold. On my 2.0l the GT3071R spools much faster than the GT2560R ever did on my 1.6l. The only problem I had was boost creep initially with the internal waste gate version. I could remove the actuator rod and safety wire the waste gate wide open and it would still want to make over 20psi up top. I ported the waste gate and can keep it a stable 12 psi now with the cat in, 14 psi without cat.
Bob ----- Original Message ----- From: <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Cc: <[email protected]> Sent: Tuesday, March 18, 2008 2:21 PM Subject: Re: 300whp street '97 1.8L build > On Mar 18, 2008 "Stephanie Turner" wrote: >> Any Turbo starting n GT25 or GT28 should fit. We can also re-machine that > ... >> ability of both turbos. But several customers have ordered them. The >> 3071 >> would have much slower spool up for a lower boost application, so you >> might > > So does a GT3071 fit on a GT25/GT28 manifold? Do other GT30xx turbos? > Or is Garrett's naming convention just broken (again?). > > --Ian > _______________________________________________ > Miatapower mailing list > [email protected] > http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower _______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
