We have a car on the lift right now that's been rubbing so badly the inner fender is all polished. Rubbing usually indicates you're getting too much travel for your tire size. Even a collapsed spring shouldn't cause rubbing - you're simply at the limits of your suspension travel. In the case of this car, it's because someone didn't install bumpstops when changing shocks. Stock shocks as best I can tell. No bumpstops at all. Your car is sitting so low - and you've tried it with two different springs - so it's either a problem with the shock or the upper mount. I can't think of how a shock would fail in a way to provide extra wheel travel, so I'm thinking upper mounts. If you still feel like moving stuff around, try moving the mount to the other side and see if the problem follows.
Keith Tanner Flyin' Miata [EMAIL PROTECTED] http://www.flyinmiata.com <http://www.flyinmiata.com/> 1-800-FLY-MX5s (orders) 1-970-464-5600 (tech) 2008 FM Open House: August 14-17 ________________________________ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Donni Sent: Monday, August 25, 2008 11:45 AM To: [email protected] Subject: Three Miatas, two sets of FM springs, and one rub...Need sage advice. I'd try to make a long story short but I simply don't know how! Basically I have a 96 M w/ GAB shocks and FM springs, installed around 2000. I have a 95M acquired last year. Well cared forsouthern car, 75,000 mi, stock suspension (until 2 weekends ago). 96 Rides a truck but handles well. I was always jealous of Ross Kuhns' 92 with Illumina's and FM springs. It rode AND handled well. So when he installed Teins I acquired his old set-up with ~40k on it. I finally got around to installing it on the 95 a couple weekends ago and here's where the problem starts: Left front tire rubs on hard right turns and dips. I figured the requisite alignment would take care of that....no dice. (-2.1 camber all 'round). I placed the car on blocks and loosened and re-tourqed everything...still nothing. static ride height was 12" at R. Front and 11 3/8" at L. Front. (12.75 in back). At this point I swiped a front spring off my 96. Side by side it was a little less than 1 coil taller so I swapped them. That corner NOW sits at 11.75". When I get in the car it goes to 11.5" and STILL rubs. All the components appear physically sound. The same stuff did not rub on Ross' car. I even swapped that spring with one that didn't rub on another car. Where do I look? Is the ride height just hopelessly low? Are the "New spec" FM springs taller? I don't mind buying a set if they are and I can be fairly sure of a remedy. I just don't want to plunk down the cash to find I still have an issue and yet another set of springs that I cannot return. Other possible culprits - Control arms? Bushings? Car was built on a Friday? Hope this is substantial enough!
_______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
