---------- Forwarded message ----------
From: Donni <[EMAIL PROTECTED]>
Date: Mon, Aug 25, 2008 at 2:36 PM
Subject: Re: Three Miatas, two sets of FM springs, and one rub...Need sage
advice.
To: Keith Tanner <[EMAIL PROTECTED]>


So you really don't think it could just be a combination of manufacturing
tolerances on this particular car and the old FM springs being about as low
as you can reasonably go? The apparently tiny margin for error makes me
think I should consider taller springs anyhow. Though I LOVE how the car
looks with these.


On Mon, Aug 25, 2008 at 2:27 PM, Donni <[EMAIL PROTECTED]> wrote:

> I'm running 205/50/15s on the stock BBS wheels. It rubbed like hell on a
> very slow, tight autocross course with 13x8s!
>
>
> On Mon, Aug 25, 2008 at 2:10 PM, Keith Tanner <[EMAIL PROTECTED]>wrote:
>
>>  The FCM bumpstops are intended to increase wheel travel. Depending on
>> the tire diameter, this can lead directly to fender rubbing. Been there,
>> done that with a set of 205/40-17s. Went back to OE bumpstops, rubbing
>> stopped.
>>
>> Keith Tanner
>> Flyin' Miata
>> [EMAIL PROTECTED]
>> http://www.flyinmiata.com
>> 1-800-FLY-MX5s (orders)
>> 1-970-464-5600 (tech)
>> 2008 FM Open House: August 14-17
>>
>>
>>  ------------------------------
>> *From:* [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] *On Behalf Of *
>> Donni
>> *Sent:* Monday, August 25, 2008 12:08 PM
>> *To:* Keith Tanner
>> *Cc:* [email protected]
>> *Subject:* Re: Three Miatas, two sets of FM springs, and one rub...Need
>> sage advice.
>>
>>  Yep. I have a shiny spot in the top center of my wheel well!
>>
>> Car has never been wrecked according to CarFax or anything I can tell
>> (I've been looking under it pretty closely and frequently lately!)
>>
>> It's the 95 btw, not the 96 but yes it's heavier (M-Edition) than a 92 w/o
>> ABS cruise and my 80 lbs or so more than Ross.
>>
>> Using stock NA mounts  with FCM bumpstops and they appear fine, but I'm
>> not sure what to look for. Maybe later in the week I'll swap the mounts and
>> see what happens. I won't have time until Thursday at the earliest.
>>
>> On Mon, Aug 25, 2008 at 2:00 PM, Keith Tanner <[EMAIL PROTECTED]>wrote:
>>
>>>  We have a car on the lift right now that's been rubbing so badly the
>>> inner fender is all polished.
>>>
>>> Rubbing usually indicates you're getting too much travel for your tire
>>> size. Even a collapsed spring shouldn't cause rubbing - you're simply at the
>>> limits of your suspension travel. In the case of this car, it's because
>>> someone didn't install bumpstops when changing shocks. Stock shocks as best
>>> I can tell. No bumpstops at all.
>>>
>>> Your car is sitting so low - and you've tried it with two different
>>> springs - so it's either a problem with the shock or the upper mount. I
>>> can't think of how a shock would fail in a way to provide extra wheel
>>> travel, so I'm thinking upper mounts. If you still feel like moving stuff
>>> around, try moving the mount to the other side and see if the problem
>>> follows.
>>>
>>>
>>>
>>> Keith Tanner
>>> Flyin' Miata
>>> [EMAIL PROTECTED]
>>> http://www.flyinmiata.com
>>> 1-800-FLY-MX5s (orders)
>>> 1-970-464-5600 (tech)
>>> 2008 FM Open House: August 14-17
>>>
>>>
>>>  ------------------------------
>>> *From:* [EMAIL PROTECTED] [mailto:
>>> [EMAIL PROTECTED] *On Behalf Of *Donni
>>> *Sent:* Monday, August 25, 2008 11:45 AM
>>> *To:* [email protected]
>>> *Subject:* Three Miatas, two sets of FM springs, and one rub...Need sage
>>> advice.
>>>
>>>   I'd try to make a long story short but I simply don't know how!
>>> Basically I have a 96 M w/ GAB shocks and FM springs, installed around 2000.
>>> I have a 95M acquired last year. Well cared forsouthern car, 75,000 mi,
>>> stock suspension (until 2 weekends ago).
>>> 96 Rides a truck but handles well.  I was always jealous of Ross Kuhns'
>>> 92 with Illumina's and FM springs. It rode AND handled well. So when he
>>> installed Teins I acquired his old set-up with ~40k on it. I finally got
>>> around to installing it on the 95 a couple weekends ago and here's where the
>>> problem starts:
>>>
>>> Left front tire rubs on hard right turns and dips. I figured the
>>> requisite alignment would take care of that....no dice. (-2.1 camber all
>>> 'round). I placed the car on blocks and loosened and re-tourqed
>>> everything...still nothing. static ride height was 12" at R. Front and 11
>>> 3/8" at L. Front. (12.75 in back).
>>>
>>> At this point I swiped a front spring off my 96. Side by side it was a
>>> little less than 1 coil taller so I swapped them. That corner NOW sits at
>>> 11.75". When I get in the car it goes to 11.5" and STILL rubs.
>>>
>>> All the components appear physically sound. The same stuff did not rub on
>>> Ross' car. I even swapped that spring with one that didn't rub on another
>>> car.
>>>
>>> Where do I look? Is the ride height just hopelessly low? Are the "New
>>> spec" FM springs taller? I don't mind buying a set if they are and I can be
>>> fairly sure of a remedy. I just don't want to plunk down the cash to find I
>>> still have an issue and yet another set of springs that I cannot return.
>>>
>>> Other possible culprits - Control arms? Bushings? Car was built on a
>>> Friday?
>>>
>>> Hope this is substantial enough!
>>>
>>>
>>
>
_______________________________________________
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower

Reply via email to