---------- Forwarded message ----------
From: Donni <[EMAIL PROTECTED]>
Date: Mon, Aug 25, 2008 at 2:27 PM
Subject: Re: Three Miatas, two sets of FM springs, and one rub...Need sage
advice.
To: Keith Tanner <[EMAIL PROTECTED]>


I'm running 205/50/15s on the stock BBS wheels. It rubbed like hell on a
very slow, tight autocross course with 13x8s!


On Mon, Aug 25, 2008 at 2:10 PM, Keith Tanner <[EMAIL PROTECTED]> wrote:

>  The FCM bumpstops are intended to increase wheel travel. Depending on the
> tire diameter, this can lead directly to fender rubbing. Been there, done
> that with a set of 205/40-17s. Went back to OE bumpstops, rubbing stopped.
>
> Keith Tanner
> Flyin' Miata
> [EMAIL PROTECTED]
> http://www.flyinmiata.com
> 1-800-FLY-MX5s (orders)
> 1-970-464-5600 (tech)
> 2008 FM Open House: August 14-17
>
>
>  ------------------------------
> *From:* [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] *On Behalf Of *
> Donni
> *Sent:* Monday, August 25, 2008 12:08 PM
> *To:* Keith Tanner
> *Cc:* [email protected]
> *Subject:* Re: Three Miatas, two sets of FM springs, and one rub...Need
> sage advice.
>
>  Yep. I have a shiny spot in the top center of my wheel well!
>
> Car has never been wrecked according to CarFax or anything I can tell (I've
> been looking under it pretty closely and frequently lately!)
>
> It's the 95 btw, not the 96 but yes it's heavier (M-Edition) than a 92 w/o
> ABS cruise and my 80 lbs or so more than Ross.
>
> Using stock NA mounts  with FCM bumpstops and they appear fine, but I'm not
> sure what to look for. Maybe later in the week I'll swap the mounts and see
> what happens. I won't have time until Thursday at the earliest.
>
> On Mon, Aug 25, 2008 at 2:00 PM, Keith Tanner <[EMAIL PROTECTED]>wrote:
>
>>  We have a car on the lift right now that's been rubbing so badly the
>> inner fender is all polished.
>>
>> Rubbing usually indicates you're getting too much travel for your tire
>> size. Even a collapsed spring shouldn't cause rubbing - you're simply at the
>> limits of your suspension travel. In the case of this car, it's because
>> someone didn't install bumpstops when changing shocks. Stock shocks as best
>> I can tell. No bumpstops at all.
>>
>> Your car is sitting so low - and you've tried it with two different
>> springs - so it's either a problem with the shock or the upper mount. I
>> can't think of how a shock would fail in a way to provide extra wheel
>> travel, so I'm thinking upper mounts. If you still feel like moving stuff
>> around, try moving the mount to the other side and see if the problem
>> follows.
>>
>>
>>
>> Keith Tanner
>> Flyin' Miata
>> [EMAIL PROTECTED]
>> http://www.flyinmiata.com
>> 1-800-FLY-MX5s (orders)
>> 1-970-464-5600 (tech)
>> 2008 FM Open House: August 14-17
>>
>>
>>  ------------------------------
>> *From:* [EMAIL PROTECTED] [mailto:
>> [EMAIL PROTECTED] *On Behalf Of *Donni
>> *Sent:* Monday, August 25, 2008 11:45 AM
>> *To:* [email protected]
>> *Subject:* Three Miatas, two sets of FM springs, and one rub...Need sage
>> advice.
>>
>>   I'd try to make a long story short but I simply don't know how!
>> Basically I have a 96 M w/ GAB shocks and FM springs, installed around 2000.
>> I have a 95M acquired last year. Well cared forsouthern car, 75,000 mi,
>> stock suspension (until 2 weekends ago).
>> 96 Rides a truck but handles well.  I was always jealous of Ross Kuhns' 92
>> with Illumina's and FM springs. It rode AND handled well. So when he
>> installed Teins I acquired his old set-up with ~40k on it. I finally got
>> around to installing it on the 95 a couple weekends ago and here's where the
>> problem starts:
>>
>> Left front tire rubs on hard right turns and dips. I figured the requisite
>> alignment would take care of that....no dice. (-2.1 camber all 'round). I
>> placed the car on blocks and loosened and re-tourqed everything...still
>> nothing. static ride height was 12" at R. Front and 11 3/8" at L. Front.
>> (12.75 in back).
>>
>> At this point I swiped a front spring off my 96. Side by side it was a
>> little less than 1 coil taller so I swapped them. That corner NOW sits at
>> 11.75". When I get in the car it goes to 11.5" and STILL rubs.
>>
>> All the components appear physically sound. The same stuff did not rub on
>> Ross' car. I even swapped that spring with one that didn't rub on another
>> car.
>>
>> Where do I look? Is the ride height just hopelessly low? Are the "New
>> spec" FM springs taller? I don't mind buying a set if they are and I can be
>> fairly sure of a remedy. I just don't want to plunk down the cash to find I
>> still have an issue and yet another set of springs that I cannot return.
>>
>> Other possible culprits - Control arms? Bushings? Car was built on a
>> Friday?
>>
>> Hope this is substantial enough!
>>
>>
>
_______________________________________________
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower

Reply via email to