The FCM bumpstops are intended to increase wheel travel. Depending on
the tire diameter, this can lead directly to fender rubbing. Been there,
done that with a set of 205/40-17s. Went back to OE bumpstops, rubbing
stopped.

Keith Tanner
Flyin' Miata
[EMAIL PROTECTED]
http://www.flyinmiata.com <http://www.flyinmiata.com/> 
1-800-FLY-MX5s (orders)
1-970-464-5600 (tech)
2008 FM Open House: August 14-17


 


________________________________

        From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf
Of Donni
        Sent: Monday, August 25, 2008 12:08 PM
        To: Keith Tanner
        Cc: [email protected]
        Subject: Re: Three Miatas, two sets of FM springs, and one
rub...Need sage advice.
        
        
        Yep. I have a shiny spot in the top center of my wheel well! 
        
        Car has never been wrecked according to CarFax or anything I can
tell (I've been looking under it pretty closely and frequently lately!)
        
        It's the 95 btw, not the 96 but yes it's heavier (M-Edition)
than a 92 w/o ABS cruise and my 80 lbs or so more than Ross.
        
        Using stock NA mounts  with FCM bumpstops and they appear fine,
but I'm not sure what to look for. Maybe later in the week I'll swap the
mounts and see what happens. I won't have time until Thursday at the
earliest.
        
        
        On Mon, Aug 25, 2008 at 2:00 PM, Keith Tanner
<[EMAIL PROTECTED]> wrote:
        

                We have a car on the lift right now that's been rubbing
so badly the inner fender is all polished.
                 
                Rubbing usually indicates you're getting too much travel
for your tire size. Even a collapsed spring shouldn't cause rubbing -
you're simply at the limits of your suspension travel. In the case of
this car, it's because someone didn't install bumpstops when changing
shocks. Stock shocks as best I can tell. No bumpstops at all.
                 
                Your car is sitting so low - and you've tried it with
two different springs - so it's either a problem with the shock or the
upper mount. I can't think of how a shock would fail in a way to provide
extra wheel travel, so I'm thinking upper mounts. If you still feel like
moving stuff around, try moving the mount to the other side and see if
the problem follows.
                 
                 

                Keith Tanner
                Flyin' Miata
                [EMAIL PROTECTED]
                http://www.flyinmiata.com <http://www.flyinmiata.com/> 
                1-800-FLY-MX5s (orders)
                1-970-464-5600 (tech)
                2008 FM Open House: August 14-17
                

                 
                
                

________________________________

                        From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Donni
                        Sent: Monday, August 25, 2008 11:45 AM
                        To: [email protected]
                        Subject: Three Miatas, two sets of FM springs,
and one rub...Need sage advice.
                        
                        
                        I'd try to make a long story short but I simply
don't know how! Basically I have a 96 M w/ GAB shocks and FM springs,
installed around 2000. I have a 95M acquired last year. Well cared
forsouthern car, 75,000 mi, stock suspension (until 2 weekends ago).
                        96 Rides a truck but handles well.  I was always
jealous of Ross Kuhns' 92 with Illumina's and FM springs. It rode AND
handled well. So when he installed Teins I acquired his old set-up with
~40k on it. I finally got around to installing it on the 95 a couple
weekends ago and here's where the problem starts:
                        
                        Left front tire rubs on hard right turns and
dips. I figured the requisite alignment would take care of that....no
dice. (-2.1 camber all 'round). I placed the car on blocks and loosened
and re-tourqed everything...still nothing. static ride height was 12" at
R. Front and 11 3/8" at L. Front. (12.75 in back).
                        
                        At this point I swiped a front spring off my 96.
Side by side it was a little less than 1 coil taller so I swapped them.
That corner NOW sits at 11.75". When I get in the car it goes to 11.5"
and STILL rubs. 
                        
                        All the components appear physically sound. The
same stuff did not rub on Ross' car. I even swapped that spring with one
that didn't rub on another car. 
                        
                        Where do I look? Is the ride height just
hopelessly low? Are the "New spec" FM springs taller? I don't mind
buying a set if they are and I can be fairly sure of a remedy. I just
don't want to plunk down the cash to find I still have an issue and yet
another set of springs that I cannot return.
                        
                        Other possible culprits - Control arms?
Bushings? Car was built on a Friday?
                        
                        Hope this is substantial enough!
                        


_______________________________________________
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower

Reply via email to