I'm trying to understand here...this adapter is used to add sensors to the existing engine-mounted oil filter mount. You wouldn't use this for a remote filter relocation setup.
Right?
-Bryan
--- On Tue, 8/26/08, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
From: [EMAIL PROTECTED] <[EMAIL PROTECTED]> Subject: Re: Snapped off OPG adapter was RE: Test message To: "Ken Bogart" <[EMAIL PROTECTED]> Cc: [EMAIL PROTECTED], [email protected] Date: Tuesday, August 26, 2008, 9:04 AM
Ken, you the man!
Found a miataturbo thread that calls out M20x1.5 as the right one, so this must be it: http://www.glowshiftdirect.com/oil-filter-sender-adapter-20mm-15-thread.aspx
Thanks again, I'll get that ordered up (along with a BSP/NPT adapter to block off the old OPG hole).
Wallyman
"Ken Bogart" <[EMAIL PROTECTED]>
"Ken Bogart" <[EMAIL PROTECTED]>
Sent by: [EMAIL PROTECTED]
08/25/2008 07:51 PM
|
|
Same thing - better price!
http://www.glowshiftdirect.com/oil-filter-adapters.aspx
KEN
On Mon, Aug 25, 2008 at 2:08 PM, Chuck Wills <[EMAIL PROTECTED]> wrote:
> This is the one I bought:
> http://www.miatamania.com/Shop/ViewProducts.aspx?PlateIndexID=53760
>
> -CW
>
>
>
>
> [EMAIL PROTECTED] wrote:
>
> I'm running the remote oil filter, could I still run the sandwich? And if
> so, where did you locate such an animal? I agree, adapting it out there that
> does sort of worry me (for all too obvious reasons now)... and I've
> considered adding oil temp sensor too...
>
> Wally
>
>
> Chuck Wills <[EMAIL PROTECTED]>
>
>
> Chuck Wills <[EMAIL PROTECTED]>
>
> 08/25/2008 01:37 PM
>
> To
> [EMAIL PROTECTED]
> cc
> Bill Cardell <[EMAIL PROTECTED]>, [email protected]
> Subject
> Re: Snapped off OPG adapter was RE: Test message
> That adapter thing always made me nervous. I put a sandwich plate adapter
> under the oil filter - it's got NPT ports for turbo oil feed, temp gauge,
> etc.
> I put the stock pressure sender back in it's BSP home in the block.
> I'm much less nervous now.
>
> -Chuck
>
> [EMAIL PROTECTED] wrote:
>
> "anything of substance"... I never bother with that criteria. :)
>
> Speaking of, I *do* have something. My OPG sender adapter snapped off in the
> block, how do I get the slug out without destroying the block?? Brass
> adapter. Pulling all the crap off the passenger side of the motor to get
> some room in there... advice appreciated.
>
> Wallyman
>
>
> "Bill Cardell" <[EMAIL PROTECTED]>
>
> "Bill Cardell" <[EMAIL PROTECTED]>
> Sent by: [EMAIL PROTECTED]
>
> 08/25/2008 01:10 PM
>
> To
> "Donni" <[EMAIL PROTECTED]>, <[email protected]>
> cc
> Subject
> RE: Test message
> Now we all expect something of substance ;-)
>
> Bill Cardell
> TurboDog's Dad
> www.flyinmiata.com
> www.fmwestfield.com
> Sales 1-800-359-6957
> Tech 970-464-5600 Before you call, check out http://www.flyinmiata.com/FAQ/
>
> ________________________________
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]] On Behalf Of Donni
> Sent: Monday, August 25, 2008 11:08 AM
> To: [email protected]
> Subject: Test message
>
> My submissions never seem to make it through. Thought I'd send a test before
> I go to the trouble of composing anything of
> substance!_______________________________________________
> Miatapower mailing list
> [email protected]
> http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
>
>
> ________________________________
> _______________________________________________
> Miatapower mailing list
> [email protected]
> http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
>
>
> _______________________________________________
> Miatapower mailing list
> [email protected]
> http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
>
>
_______________________________________________
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
_______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
|
_______________________________________________
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower