You have it right. I was just wondering if anyone has run it with a remote oil filter (it says compatible but if I believed everything on the internet, I'd be working 2 minutes a day while making $100,000 a year!)
I have a remote oil filter already, and an aftermarket OPG (that requires a
NPT/BSP adapter, which is what snapped off). So, my solution is this:
Pull BSP adapter slug out of block OPG hole, plug with factory sender (will
be unused), I think I have one laying around somewhere I can use.
Add that collar to the oil filter location, under the remote oil filter
part I already have installed.
Collar will have 4 holes, one hole to feed my aftermarket electric OPG
(currently flaky, sending a note to Autometer to see if I can get a new
sender), another for a mechanical OPG under hood (currently a temporary
solution till I can relace my electric sender), another for a future Oil
temp gauge, and 1 more for future whatever.
I have a track day this Saturday and I won't run without a working OPG so I
need to solve this mess as soon as possible. Even if it's the mechanical
taped to the windshield, I don't care as long as I have some indicator.
The last few track events I've seen the pressure around 25 psi at 6k on
that flaky gauge, so I want to make sure it really WAS the sender and not
reality. In around town, I see 40psi at cruise, but I haven't tracked it
with the mechanical. This all happened when I pulled the sender, and
installed a T fitting and added the mechanical to the mix. Apparently the
BSP/NPT adapter snapped as a result of the removal/reinstall. So, I have to
fix the factory hole, and create a new place to hook a sender that (if it
happens again) won't require complete removal of the intake side of the
motor to fix.
Wally
Bryan Wyatt
<[EMAIL PROTECTED]>
Sent by: To
[EMAIL PROTECTED] Miata Power List
apower.net <[email protected]>
cc
08/26/2008 09:42 AM Subject
Re: Snapped off OPG adapter
was RE: Test message
Please respond to
[EMAIL PROTECTED]
I'm trying to understand here...this adapter is used to add sensors to the
existing engine-mounted oil filter mount. You wouldn't use this for a
remote filter relocation setup.
Right?
-Bryan
--- On Tue, 8/26/08, [EMAIL PROTECTED] <[EMAIL PROTECTED]>
wrote:
From: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
Subject: Re: Snapped off OPG adapter was RE: Test message
To: "Ken Bogart" <[EMAIL PROTECTED]>
Cc: [EMAIL PROTECTED], [email protected]
Date: Tuesday, August 26, 2008, 9:04 AM
Ken, you the man!
Found a miataturbo thread that calls out M20x1.5 as the right one, so
this must be it:
http://www.glowshiftdirect.com/oil-filter-sender-adapter-20mm-15-thread.a
spx
Thanks again, I'll get that ordered up (along with a BSP/NPT adapter to
block off the old OPG hole).
Wallyman
Inactive hide details for "Ken Bogart" <[EMAIL PROTECTED]>"Ken Bogart"
<[EMAIL PROTECTED]>
"Ken Bogart" <[EMAIL PROTECTED]>
Sent by: [EMAIL PROTECTED]
08/25/2008 07:51 PM
To
"Chuck Wills" <[EMAIL PROTECTED]>
cc
[email protected]
Subject
Re: Snapped off OPG adapter was RE:
Test message
Same thing - better price!
http://www.glowshiftdirect.com/oil-filter-adapters.aspx
KEN
On Mon, Aug 25, 2008 at 2:08 PM, Chuck Wills <[EMAIL PROTECTED]> wrote:
> This is the one I bought:
> http://www.miatamania.com/Shop/ViewProducts.aspx?PlateIndexID=53760
>
> -CW
>
>
>
>
> [EMAIL PROTECTED] wrote:
>
> I'm running the remote oil filter, could I still run the sandwich? And
if
> so, where did you locate such an animal? I agree, adapting it out there
that
> does sort of worry me (for all too obvious reasons now)... and I've
> considered adding oil temp sensor too...
>
> Wally
>
>
> Chuck Wills <[EMAIL PROTECTED]>
>
>
> Chuck Wills <[EMAIL PROTECTED]>
>
> 08/25/2008 01:37 PM
>
> To
> [EMAIL PROTECTED]
> cc
> Bill Cardell <[EMAIL PROTECTED]>, [email protected]
> Subject
> Re: Snapped off OPG adapter was RE: Test message
> That adapter thing always made me nervous. I put a sandwich plate
adapter
> under the oil filter - it's got NPT ports for turbo oil feed, temp
gauge,
> etc.
> I put the stock pressure sender back in it's BSP home in the block.
> I'm much less nervous now.
>
> -Chuck
>
> [EMAIL PROTECTED] wrote:
>
> "anything of substance"... I never bother with that criteria. :)
>
> Speaking of, I *do* have something. My OPG sender adapter snapped off
in the
> block, how do I get the slug out without destroying the block?? Brass
> adapter. Pulling all the crap off the passenger side of the motor to
get
> some room in there... advice appreciated.
>
> Wallyman
>
>
> "Bill Cardell" <[EMAIL PROTECTED]>
>
> "Bill Cardell" <[EMAIL PROTECTED]>
> Sent by: [EMAIL PROTECTED]
>
> 08/25/2008 01:10 PM
>
> To
> "Donni" <[EMAIL PROTECTED]>, <[email protected]>
> cc
> Subject
> RE: Test message
> Now we all expect something of substance ;-)
>
> Bill Cardell
> TurboDog's Dad
> www.flyinmiata.com
> www.fmwestfield.com
> Sales 1-800-359-6957
> Tech 970-464-5600 Before you call, check out
http://www.flyinmiata.com/FAQ/
>
> ________________________________
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Donni
> Sent: Monday, August 25, 2008 11:08 AM
> To: [email protected]
> Subject: Test message
>
> My submissions never seem to make it through. Thought I'd send a test
before
> I go to the trouble of composing anything of
> substance!_______________________________________________
> Miatapower mailing list
> [email protected]
> http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
>
>
> ________________________________
> _______________________________________________
> Miatapower mailing list
> [email protected]
> http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
>
>
> _______________________________________________
> Miatapower mailing list
> [email protected]
> http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
>
>
_______________________________________________
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
_______________________________________________
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
_______________________________________________
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
<<inline: graycol.gif>>
<<inline: pic07469.gif>>
<<inline: ecblank.gif>>
<<inline: C5336787.gif>>
<<inline: C3671471.gif>>
<<inline: C2397467.gif>>
<<inline: C9119142.gif>>
<<inline: C0434262.gif>>
<<inline: C9501618.gif>>
<<inline: C4419716.gif>>
<<inline: C2683378.gif>>
<<inline: C5215197.gif>>
_______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
