Bought that one, came in last night, got it installed.. however, a couple of comments for anyone else trying this route:
1 - in as-delivered form, only one of the 4 ports can hold a pressure
sender, and the other three ports can't possibly hold anything due to the
crap located nearby. Behind is the starter, below is block casting, front
is alternator, top is intake. The only config that worked was putting the
sender behind the alternator.
2 - by adding 3 street 90's, the ports are more accessible. HOWEVER! You
still can't put a sender on all of them if you run a remote oil filter
because the casting ridges on the filter adapter stick out and prevent the
sender from seating.
Final configuration:
Stock OPG location - BST to NPT to Mechanical gauge line
port at 8 o'clock, plugged and unusable
port at 5 o'clock, street 90 to plug, possible future oil temp if the
sender is small
port at 4 o'clock, street 90 to Autometer sender
port at 1 o'clock, street 90 to plug, possible future oil temp if the
sender is small
Only other comment, the new adapter, the threads are on the large size.
Every adapter, plug or sender I screwed into any of the 4 holes bottomed
out in order to be tightened, as opposed to the taper on the threads
tightening before bottoming out. The BST to NPT adapter also bottomed out
in the block, when the old one that snapped off did not.
See other email for oil pressure results.
Wallyman
"Ken Bogart"
<[EMAIL PROTECTED]>
Sent by: To
[EMAIL PROTECTED] "Chuck Wills"
apower.net <[EMAIL PROTECTED]>
cc
[email protected]
08/25/2008 07:51 PM Subject
Re: Snapped off OPG adapter
was RE: Test message
Same thing - better price!
http://www.glowshiftdirect.com/oil-filter-adapters.aspx
KEN
On Mon, Aug 25, 2008 at 2:08 PM, Chuck Wills <[EMAIL PROTECTED]> wrote:
> This is the one I bought:
> http://www.miatamania.com/Shop/ViewProducts.aspx?PlateIndexID=53760
>
> -CW
>
>
>
>
> [EMAIL PROTECTED] wrote:
>
> I'm running the remote oil filter, could I still run the sandwich? And if
> so, where did you locate such an animal? I agree, adapting it out there
that
> does sort of worry me (for all too obvious reasons now)... and I've
> considered adding oil temp sensor too...
>
> Wally
>
>
> Chuck Wills <[EMAIL PROTECTED]>
>
>
> Chuck Wills <[EMAIL PROTECTED]>
>
> 08/25/2008 01:37 PM
>
> To
> [EMAIL PROTECTED]
> cc
> Bill Cardell <[EMAIL PROTECTED]>, [email protected]
> Subject
> Re: Snapped off OPG adapter was RE: Test message
> That adapter thing always made me nervous. I put a sandwich plate adapter
> under the oil filter - it's got NPT ports for turbo oil feed, temp gauge,
> etc.
> I put the stock pressure sender back in it's BSP home in the block.
> I'm much less nervous now.
>
> -Chuck
>
> [EMAIL PROTECTED] wrote:
>
> "anything of substance"... I never bother with that criteria. :)
>
> Speaking of, I *do* have something. My OPG sender adapter snapped off in
the
> block, how do I get the slug out without destroying the block?? Brass
> adapter. Pulling all the crap off the passenger side of the motor to get
> some room in there... advice appreciated.
>
> Wallyman
>
>
> "Bill Cardell" <[EMAIL PROTECTED]>
>
> "Bill Cardell" <[EMAIL PROTECTED]>
> Sent by: [EMAIL PROTECTED]
>
> 08/25/2008 01:10 PM
>
> To
> "Donni" <[EMAIL PROTECTED]>, <[email protected]>
> cc
> Subject
> RE: Test message
> Now we all expect something of substance ;-)
>
> Bill Cardell
> TurboDog's Dad
> www.flyinmiata.com
> www.fmwestfield.com
> Sales 1-800-359-6957
> Tech 970-464-5600 Before you call, check out
http://www.flyinmiata.com/FAQ/
>
> ________________________________
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Donni
> Sent: Monday, August 25, 2008 11:08 AM
> To: [email protected]
> Subject: Test message
>
> My submissions never seem to make it through. Thought I'd send a test
before
> I go to the trouble of composing anything of
> substance!_______________________________________________
> Miatapower mailing list
> [email protected]
> http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
>
>
> ________________________________
> _______________________________________________
> Miatapower mailing list
> [email protected]
> http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
>
>
> _______________________________________________
> Miatapower mailing list
> [email protected]
> http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
>
>
_______________________________________________
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
<<inline: graycol.gif>>
<<inline: pic18457.gif>>
<<inline: ecblank.gif>>
_______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
