Wally,
Since you already have a remote oil filter, couldn't you just drill/tap either the remote filter mount or the spin-on adapter?
Alternatively, you might be able to find an adapter that T's into the existing line to the remote filter.  I don't know what kind of hose/fittings the car has, or I'd do a search for you.
-Chuck



[EMAIL PROTECTED] wrote:

You have it right. I was just wondering if anyone has run it with a remote oil filter (it says compatible but if I believed everything on the internet, I'd be working 2 minutes a day while making $100,000 a year!)

I have a remote oil filter already, and an aftermarket OPG (that requires a NPT/BSP adapter, which is what snapped off). So, my solution is this:

Pull BSP adapter slug out of block OPG hole, plug with factory sender (will be unused), I think I have one laying around somewhere I can use.
Add that collar to the oil filter location, under the remote oil filter part I already have installed.
Collar will have 4 holes, one hole to feed my aftermarket electric OPG (currently flaky, sending a note to Autometer to see if I can get a new sender), another for a mechanical OPG under hood (currently a temporary solution till I can relace my electric sender), another for a future Oil temp gauge, and 1 more for future whatever.

I have a track day this Saturday and I won't run without a working OPG so I need to solve this mess as soon as possible. Even if it's the mechanical taped to the windshield, I don't care as long as I have some indicator. The last few track events I've seen the pressure around 25 psi at 6k on that flaky gauge, so I want to make sure it really WAS the sender and not reality. In around town, I see 40psi at cruise, but I haven't tracked it with the mechanical. This all happened when I pulled the sender, and installed a T fitting and added the mechanical to the mix. Apparently the BSP/NPT adapter snapped as a result of the removal/reinstall. So, I have to fix the factory hole, and create a new place to hook a sender that (if it happens again) won't require complete removal of the intake side of the motor to fix.

Wally


Inactive hide details for Bryan Wyatt <[EMAIL PROTECTED]>Bryan Wyatt <[EMAIL PROTECTED]>



To

Miata Power List <[email protected]>

cc


Subject

Re: Snapped off OPG adapter was RE: Test message
I'm trying to understand here...this adapter is used to add sensors to the existing engine-mounted oil filter mount. You wouldn't use this for a remote filter relocation setup.

Right?

-Bryan

--- On Tue, 8/26/08, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
From: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
Subject: Re: Snapped off OPG adapter was RE: Test message
To: "Ken Bogart" <[EMAIL PROTECTED]>
Cc: [EMAIL PROTECTED], [email protected]
Date: Tuesday, August 26, 2008, 9:04 AM

Ken, you the man!

Found a miataturbo thread that calls out M20x1.5 as the right one, so this must be it:
http://www.glowshiftdirect.com/oil-filter-sender-adapter-20mm-15-thread.aspx

Thanks again, I'll get that ordered up (along with a BSP/NPT adapter to block off the old OPG hole).


Wallyman



Inactive hide details for "Ken Bogart" <[EMAIL PROTECTED]>"Ken Bogart" <[EMAIL PROTECTED]>



To

"Chuck Wills" <[EMAIL PROTECTED]>
cc

[email protected]
Subject

Re: Snapped off OPG adapter was RE: Test message

Same thing - better price!

http://www.glowshiftdirect.com/oil-filter-adapters.aspx

KEN


On Mon, Aug 25, 2008 at 2:08 PM, Chuck Wills <[EMAIL PROTECTED]> wrote:
> This is the one I bought:
>
http://www.miatamania.com/Shop/ViewProducts.aspx?PlateIndexID=53760
>
> -CW
>
>
>
>
> [EMAIL PROTECTED] wrote:
>
> I'm running the remote oil filter, could I still run the sandwich? And if
> so, where did you locate such an animal? I agree, adapting it out there that
> does sort of worry me (for all too obvious reasons now)... and I've
> considered adding oil temp sensor too...
>
> Wally
>
>
> Chuck Wills <[EMAIL PROTECTED]>
>
>
> Chuck Wills <[EMAIL PROTECTED]>
>
> 08/25/2008 01:37 PM
>
> To
> [EMAIL PROTECTED]
> cc
> Bill Cardell <[EMAIL PROTECTED]>, [email protected]
> Subject
> Re: Snapped off OPG adapter was RE: Test message
> That adapter thing always made me nervous. I put a sandwich plate adapter
> under the oil filter - it's got NPT ports for turbo oil feed, temp gauge,
> etc.
> I put the stock pressure sender back in it's BSP home in the block.
> I'm much less nervous now.
>
> -Chuck
>
> [EMAIL PROTECTED] wrote:
>
> "anything of substance"... I never bother with that criteria. :)
>
> Speaking of, I *do* have something. My OPG sender adapter snapped off in the
> block, how do I get the slug out without destroying the block?? Brass
> adapter. Pulling all the crap off the passenger side of the motor to get
> some room in there... advice appreciated.
>
> Wallyman
>
>
> "Bill Cardell" <[EMAIL PROTECTED]>
>
> "Bill Cardell" <[EMAIL PROTECTED]>
> Sent by: [EMAIL PROTECTED]
>
> 08/25/2008 01:10 PM
>
> To
> "Donni" <[EMAIL PROTECTED]>, <[email protected]>
> cc
> Subject
> RE: Test message
> Now we all expect something of substance ;-)
>
> Bill Cardell
> TurboDog's Dad
> www.flyinmiata.com
> www.fmwestfield.com
> Sales 1-800-359-6957
> Tech 970-464-5600 Before you call, check out
http://www.flyinmiata.com/FAQ/
>
> ________________________________
> From: [EMAIL PROTECTED]
> [
mailto:[EMAIL PROTECTED]] On Behalf Of Donni
> Sent: Monday, August 25, 2008 11:08 AM
> To: [email protected]
> Subject: Test message
>
> My submissions never seem to make it through. Thought I'd send a test before
> I go to the trouble of composing anything of
> substance!_______________________________________________
> Miatapower mailing list
> [email protected]
>
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
>
>
> ________________________________
> _______________________________________________
> Miatapower mailing list
> [email protected]
>
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
>
>
> _______________________________________________
> Miatapower mailing list
> [email protected]
>
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
>
>
_______________________________________________
Miatapower mailing list
[email protected]

http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower

_______________________________________________
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower

_______________________________________________
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower


_______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower


_______________________________________________
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower

Reply via email to