Nope.. standard is 240-33 or 0-90 from everything I can tell.
Wallyman
-----Jason C <[email protected]> wrote: -----
To: [email protected], [email protected]
From: Jason C <[email protected]>
Date: 03/20/2009 11:52PM
Subject: Re: NMC - Need a 150ohm-10ohm oil pressure sender
Might that be a standard VDO spec?
--- On Fri, 3/20/09, [email protected] <[email protected]> wrote:From: [email protected] <[email protected]>
Subject: NMC - Need a 150ohm-10ohm oil pressure sender
To: [email protected]
Date: Friday, March 20, 2009, 10:00 AM_______________________________________________Trying to find a 150 @0 psi to 10 @ 100psi sender for the RX7 for a custom gauge.. anyone know of such a monster? Can be from any vehicle or universal, any thread size... Most I can find 240-33 or 0-90.
Might even be able to use a 100 @ 0 psi to 0 @ 100psi sender... thanks!
Wallyman
p.s. hope to drive the car legally this weekend.. if the exhaust shop finishes.
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
This e-mail and any attachments contain URS Corporation confidential information that may be proprietary or privileged. If you receive this message in error or are not the intended recipient, you should not retain, distribute, disclose or use any of this information and you should destroy the e-mail and any attachments or copies. |
_______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
