Many of us have Wally to thank for extra-functional (read: linear
output) stock temp gauges. Are you still making those Wally?
Brad
[email protected] wrote:
I looked at doing that.. except I want all the
gauges to match, and that's a $450+ proposition if I go down the
aftermarket route.. and that's $450 more than I have to spend.
Besides, I love tearing apart my cluster and spending
hours playing with it.. ;)
Wallyman
 "Scott Ingram"
<[email protected]>
I replaced the factory temp gauge with a
Autometer in my Miata cluster. 99% of the people never notice it.
From: [email protected] [mailto:[email protected]]
On Behalf Of [email protected]
Sent: Monday, March 23, 2009
6:48 PM
To: [email protected]
Cc: [email protected];
[email protected]
Subject: Re: NMC - Need a
150ohm-10ohm oil pressure sender
Sort of.. The FC OPG is pure crap, you
should look at that back of one to see how it's built (FC, S4 or S5..
both the same). Trying to find a way to use the Fuel or the Temp gauge
in it's place... keep the face, but use a "real" gauge behind it. The
fuel and the coolant are oddball ranges tho so not making any progress.
:(
Wally
-----Ashraf Farrag
<[email protected]> wrote: -----
To: [email protected]
From: Ashraf Farrag <[email protected]>
Date: 03/23/2009 01:57PM
cc: [email protected]
Subject: Re: NMC - Need a 150ohm-10ohm oil pressure sender
Wally,
>
> Trying to find a 150 @0 psi to 10 @ 100psi sender for the RX7 for
a
> custom gauge.. anyone know of such a monster? Can be from any
vehicle
> or universal, any thread size... Most I can find 240-33 or 0-90.
>
> Might even be able to use a 100 @ 0 psi to 0 @ 100psi sender...
thanks!
>
More details on the custom gauge part? Is this to replace the FC gauge
sender but use the FC gauge in the dash?
I have a similar need/project in mind and am wondering if we can come
up
with a similar solution. Please let me know if you find an exact
replacement sender with these characteristics.
FWIW, the FD gauge sender is 10 ohms at 120 PSI and infinity at 0 psi
but are notoriously known for reading low oil pressure at idle after
some time. I think it is a common problem with Mazda gauge senders.
--Ashraf
This e-mail and any attachments contain URS Corporation confidential
information that may be proprietary or privileged. If you receive this
message in error or are not the intended recipient, you should not
retain, distribute, disclose or use any of this information and you
should destroy the e-mail and any attachments or copies. |
No virus found in this incoming
message.
Checked by AVG - www.avg.com
Version: 8.0.238 / Virus Database: 270.11.27/2021 - Release Date:
03/24/09 16:00:00
_______________________________________________
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
|
_______________________________________________
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
