yah, a 21mm with a 6" extension goes well over a swaybar - if the rad is pulled. No extension and a short socket works well with rad in. I found a midsized breaker bar at HF for cheap that is my new favorite miata tool. Big enough to move things but I can still get it in places.
On Jun 16, 2011, at 2:19 PM, [email protected] wrote: > I use a 21mm socket on a wratchet to turn the pulley bolt. > > The clutch safety switch is located above the clutch pedal. It is the white > box switch about 1.5" and .5" in size with two 10 ga wires coming out of it. > > > > -----Original Message----- > From: derf <[email protected]> > To: Miata Power List <[email protected]> > Sent: Thu, Jun 16, 2011 2:14 pm > Subject: Under Hood Starter? > > Is there a clever way to bump the starter on a Miata from under the > hood? Where are the starter relay and clutch switch located? > > Having to get in the car, depress the clutch, and turn the key gets > old after a while when you just want to bump the crank 1/4 turn. > _______________________________________________ > Miatapower mailing list > [email protected] > http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower > _______________________________________________ > Miatapower mailing list > [email protected] > http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
_______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
