What I've done in the past is put 12v on the ~1/4 inch connector on the
starter solenoid. Just make a jumper wire from that to a handy 12v
source. The starter will engage and spin as soon as you do so make sure
its in neutral.
On 6/16/2011 1:19 PM, [email protected] wrote:
I use a 21mm socket on a wratchet to turn the pulley bolt.
The clutch safety switch is located above the clutch pedal. It is the
white box switch about 1.5" and .5" in size with two 10 ga wires
coming out of it.
-----Original Message-----
From: derf <[email protected]>
To: Miata Power List <[email protected]>
Sent: Thu, Jun 16, 2011 2:14 pm
Subject: Under Hood Starter?
Is there a clever way to bump the starter on a Miata from under the
hood? Where are the starter relay and clutch switch located?
Having to get in the car, depress the clutch, and turn the key gets
old after a while when you just want to bump the crank 1/4 turn.
_______________________________________________
Miatapower mailing list
[email protected] <mailto:[email protected]>
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
_______________________________________________
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
_______________________________________________
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
