That is true. If i got to send someone up, it is worth moving to the
XR2 radio?
Chris Gotstein
Sr Network Engineer
UP Logon/Computer Connection UP
500 N Stephenson Ave
Iron Mountain, MI 49801
Phone: 906-774-4847
Fax: 906-774-0335
[email protected]
Josh Luthman wrote:
I agree with that and I was thinkin that myself. However we can all
agree we've seen far stranger things.
On 1/22/09, Chris Gotstein <[email protected]> wrote:
Odd that the antenna would only work well on 1 channel. You'd think the
whole thing would just die out if the antenna was bad. Unless the noise
has just gotten that bad around here.
Chris Gotstein
Sr Network Engineer
UP Logon/Computer Connection UP
500 N Stephenson Ave
Iron Mountain, MI 49801
Phone: 906-774-4847
Fax: 906-774-0335
[email protected]
Josh Luthman wrote:
If it connects on ch 1 I doubt any water is in the connectors.
Antenna could be shot, though.
On 1/22/09, Robert Andrews <[email protected]> wrote:
what are your signal strengths? What is your omni? Something is very
wrong. Have you checked for water in cables?
Chris Gotstein wrote:
As far as i'm aware, we are the only WISP in the area. Our other
tower sites are more than 15 miles away from this tower. Sectors
would be my next option, and probably moving to horizontal polarization.
Chris Gotstein
Sr Network Engineer
UP Logon/Computer Connection UP
500 N Stephenson Ave
Iron Mountain, MI 49801
Phone: 906-774-4847
Fax: 906-774-0335
[email protected]
Robert Andrews wrote:
You have heavy interference from somewhere else. Are there Canopy's
in the area? Do you have other transmitters in the area?
Basically, when you go to G you are spending enough time in the upper
channels where the interference is that you disappear to the
clients... G hops to all channels equally, whereas B spend most of
it's time in the set channel. You may need to sectorize...
Robert
Chris Gotstein wrote:
1 or 2 would connect and then drop off. I just tried a few other
channels and the same thing happens. Go back to channel 1 and they
all connect.
Chris Gotstein
Sr Network Engineer
UP Logon/Computer Connection UP
500 N Stephenson Ave
Iron Mountain, MI 49801
Phone: 906-774-4847
Fax: 906-774-0335
[email protected]
Josh Luthman wrote:
None of the 30 connected!?
On 1/22/09, Chris Gotstein <[email protected]> wrote:
I was just going to do that. Also, when i moved over to B/G, my CCQ
went from 80 down to 10. And when i tried changing channels, the
clients would not reconnect.
Chris Gotstein
Sr Network Engineer
UP Logon/Computer Connection UP
500 N Stephenson Ave
Iron Mountain, MI 49801
Phone: 906-774-4847
Fax: 906-774-0335
[email protected]
Josh Luthman wrote:
If you can enable G, do. It should help if the clients can use the
compression.
With an omni you can pick up oodles of interference, can you do a
scan
late tonight?
On 1/22/09, Chris Gotstein <[email protected]> wrote:
2.4B, but i could change it to B/G if needed. Usage is fairly
light, no
more than 1-2mb going through the AP at one time. Sometimes we
see a
spike to 3mb. We are routed, VLAN'd at each tower and sometimes
AP.
This AP is using a 8db omni.
I know about hidden nodes, but i guess I'll need to read up on
it more.
How do i check for them?
Chris Gotstein
Sr Network Engineer
UP Logon/Computer Connection UP
500 N Stephenson Ave
Iron Mountain, MI 49801
Phone: 906-774-4847
Fax: 906-774-0335
[email protected]
Robert Andrews wrote:
2.4Ghz? Running 802.11b? 30 Customers.. What kind of usage
are you
seeing. One of the biggest advantages of the MT is the ability
to see
what customers are really pulling... if you are running
straight
802.11b then the max you are going to see through this is
probably
around 4mb/s and if your customers are all allowed 1.5mb/s you
are going
to see frequent times when they are competing with each
other. What
are you seeing for hidden nodes? What's your physical
layout? Are
they off a sector or an omni? So much that this could be.
Robert
Chris Gotstein wrote:
We put up a RB532 late last fall to replace a Tranzeo TR6600.
We had
noticed that on the 6600's that when you get more than 10
people on
them, they start performing very poorly. So, the solution
that i had
been hearing was to move to a mikrotik box. At the time, we
purchased
a RB532 board and have a SR2 wireless card. Worked great for
the
first month, and since then it's back to slowing down and we are
starting to get complaints about slow speeds, etc. We have
about 30
clients attaching to this one box, and they are limited to
1.5mb dl
and 384k up. I thought this box would easily handle that many
connections and data, but it doesn't seem to be keeping up. I'm
running the latest firmware on the board and am running out of
ideas
to tweak this. Any suggestions? Maybe need to move to a
faster box?
Ditch MT and go with another AP vendor?
_______________________________________________
Mikrotik mailing list
[email protected]
http://www.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to
Mikrotik
RouterOS
_______________________________________________
Mikrotik mailing list
[email protected]
http://www.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to
Mikrotik
RouterOS
_______________________________________________
Mikrotik mailing list
[email protected]
http://www.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to
Mikrotik RouterOS
_______________________________________________
Mikrotik mailing list
[email protected]
http://www.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to Mikrotik
RouterOS
_______________________________________________
Mikrotik mailing list
[email protected]
http://www.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to Mikrotik
RouterOS
_______________________________________________
Mikrotik mailing list
[email protected]
http://www.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to Mikrotik
RouterOS
_______________________________________________
Mikrotik mailing list
[email protected]
http://www.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to Mikrotik
RouterOS
_______________________________________________
Mikrotik mailing list
[email protected]
http://www.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
_______________________________________________
Mikrotik mailing list
[email protected]
http://www.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
