Thank you very much for your help. Now I can see that the MN is working correctly in the Home network (mn_move: in home net).
The new Mobile-IPv6-HOWTO helped me a lot, too. Regards, Sondes --- Surekha <[EMAIL PROTECTED]> a écrit : > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On > Behalf Of larafa sondes > Sent: Thursday, April 13, 2006 9:36 PM > To: Surekha; [email protected] > Subject: RE: [mipl] Mobile IPv6, Linux 2.6 (MN), > FreeBSD (HA) > > > > > May be I have to put the MN in the Home network > > first > > and test if it can communicate with the HA. > > I don't know how to change the MN foreign adress > to > > a > > Home adress! > > > > Connect MN to home network and make the interface > > down and up or reboot MN > > in home network. > > OK > > > > > Check whether HA is sending any router > > advertisements in the home network. > > This you can check with the following applications > > which can be run either > > on HA or MN. > > Tcpdump ip6 > > Or > > Ethereal > > I'm using Ethereal on HA > > > > > If ethereal is used, we can see the router > > advertisement contents also to > > check if the home agent flag is set in the router > > advertisement > > I can see router advertisements:flags 0x00 > (...) > ..0. ....=Not Home > Agent > (...) > > ---->>If you are able to see the router > advertisements, "rtadvd" daemon > should be running. > Restart the rtadvd daemon giving "-m" option which > sets the mipv6 related > things in router advertisements. > Also in the conf file for rtadvd specify some valid > lifetime. > > A sample conf file entries for rtadvd can be as > follows: > --------------------- > Xl1:\ > :rltime#100: > --------------------- > We can start the rtadvd daemon as follows: > > Rtadvd -m xl1 > > Where xl1 is the interface name of HA in home > network. > > Rtadvd executable is the one which is under > /usr/local/v6/sbin or > /usr/local/v6/bin > > > > > > And then check the ping from HA to MN in home > > network. > > Ok. It works. > > So the HA is not working correctly. > This is how I have configured the HA: > > 1) /usr/local/v6/etc/had.conf: > debug 1; > > interface xl1 { > command-port 7778; > preference 10; > }; > > 2) /etc/rc.conf > ipv6_ifconfig_xl1_alias0="2001:660:3203:1012::1000" > ipv6_ifconfig_xl1_alias1="2001:660:3203:1012:fdff:ffff:ffff:fffe > anycast" > ipv6_mobile_enable="YES" > ipv6_mobile_nodetype="home_agent" > ipv6_mobile_home_interface="xl1" > > ipv6_default_router="fe80::206:5bff:fe55:4a87%xl1" > > ---then reboot > > Is there something wrong on that? > > (can I apply the filter AH with Ethereal?) > > --> IPsec is not enabled right! why do u want to > apply filter AH. Its not > required. You can apply filter "ip6" just to get the > ipv6 packets. > > Just check the source address of the IPv6 packet if > you want to know whether > the packet is from HA or not. > > Thank you very much for help! > > regards, > > Sondes > > > > > Regards, > > Surekha. > > > > > > -----Original Message----- > > > > From: [EMAIL PROTECTED] > > > > [mailto:[EMAIL PROTECTED] On > > > > Behalf Of larafa sondes > > > > Sent: Wednesday, April 12, 2006 6:50 PM > > > > To: [email protected] > > > > Subject: [mipl] Mobile IPv6, Linux 2.6 (MN), > > > FreeBSD > > > > (HA) > > > > > > > > Hello, > > > > > > > > I'm trying to test that the Mobile Node (Linux > > > > 2.6.15) > > > > can reach the Home Agent (FreeBSD 5.4). > > > > > > > > The first thing I've done is: > > > > > > > > $sudo mip6d -c mn.conf > > > > > > > > I've got: > > > > ... > > > > conf_home_addr_info: HoA address > > > > 2001:660:3203:1012:203:47ff:fefb:1fd > > > > conf_home_addr_info: HA address > > > > 2001:660:3203:1012:0:0:0:1000 > > > > __tunnel_add: created tunnel ip6tnl1 (5) from > > > > 2001:660:3203:1012:203:47ff:fefb:1fd to > > > > 2001:660:3203:1012:0:0:0:1000 user count 1 > > > > conf_home_addr_info: Home address > > > > 2001:660:3203:1012:203:47ff:fefb:1fd > > > > flag_hoa: set HoA > > > > 2001:660:3203:1012:203:47ff:fefb:1fd/128 iif 5 > > > flags > > > > 10 preferred_time 4294967295 valid_time > > 4294967295 > > > > conf_home_addr_info: Added new home_addr_info > > > > successfully > > > > __md_discover_router: discover link on iface > > eth0 > > > > (1) > > > > md_change_default_router: add new router > > > > fe80:0:0:0:210:5aff:fe48:1c5 on interface eth0 > > (1) > > > > > > > > Here messages have stopped and I've got no > > prompt > > > $. > > > > > > > > I can't understand the last messages I've got. > > > > > > > > Can somebody help please! > > > > > > > > Thanks and regards, > > > > > > > > Sondes > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ___________________________________________________________________________ > > > > > > > > Faites de Yahoo! votre page d'accueil sur le > web > > > > pour retrouver directement > === message truncated === ___________________________________________________________________________ Faites de Yahoo! votre page d'accueil sur le web pour retrouver directement vos services préférés : vérifiez vos nouveaux mails, lancez vos recherches et suivez l'actualité en temps réel. Rendez-vous sur http://fr.yahoo.com/set _______________________________________________ mipl mailing list [email protected] http://www.mobile-ipv6.org/cgi-bin/mailman/listinfo/mipl
