Hey,
I had a look at some of the files.
There is something in mip6d.conf that seems wrong to me:
MnHomeLink "eth0" {
HomeAgentAddress 2001:660:3203:1012::beef;
HomeAddress 2001:660:3203:1016::5/64;
}
Home Address and HomeAgentAddress should belong to the same
link: 2001:660:3203:1012::/64
HomeAddress should be 2001:660:3203:1012::5/64;
What I found strange in the ifconfig output, is that eth0 has two
auto-configured IPv6 global addresses: one for 2001:660:3203:1012::/64
and one for 2001:660:3203:1016::/64. This is as if the MN received RA
for both prefixes on the foreign link.
If the address 2001:660:3203:1012:203:47ff:fefb:1fd is really
auto-configured, MN should have removed it when it moved to the
foreign link.
Last thing, you use a Debian distribution, so maybe you encounter the
same problem as Leif Buch-Pedersen describes on the ML. He also have
an issue with BUs not being sent.
I should install a Debian myself to check this.
Benjamin
larafa sondes wrote:
Hi,
Thank you very much for your attention on this
problem.
--- Benjamin Thery <[EMAIL PROTECTED]> a écrit :
Can you send me your configurations files for both
HA and MN?
mip6d.conf, ipsec configuration, radvd
configuration.
I have not used IPsec yet.
I attached configuration files to this mail.
(May be you send them before but I couldn't find
them in my email archive)
I'll have a look at it, and tell you if I see
something suspect ;)
Can you tell me which Linux distribution you use on
both nodes?
FreeBSD 5.4 with kame/shisa for HA and Home Access
Router (same machine).
Debian with patched kernel 2.6.15 and mipv6-2.0.1 for
MN.
Some more things that could help are:
- A trace of ifconfig on MN before you start mip6d.
I attached to this mail a screen snapshot of ifconfig.
- An ethereal capture on the MN for the following
events:
- unplug your MN interface
- start ethereal in promiscuous mode
- start mip6d on MN
- plug ethernet cable
- wait for while (ideally until the router sends a
RA)
- (or even better until HA sends the
BA)
- stop ethereal
- A trace of mip6d execution during the above
operation.
I attached to this mail the screen snapshot of mip6d
and the ethereal capture.
Hope I can help you
Thanks and regards,
Sondes
PS: theese attached file names mean:
-Debian etc_init.d_mipv6 stands for
/etc/init.d/mipv6 in Debian file system
-Debian_etc_mip6d.conf stands for
/usr/local/etc/mip6d.conf in Debian file system
-FreeBSD_etc_rc.conf stans for /etc/rc.conf in
FreeBSd file system
___________________________________________________________________________
Faites de Yahoo! votre page d'accueil sur le web pour retrouver directement vos services préférés : vérifiez vos nouveaux mails, lancez vos recherches et suivez l'actualité en temps réel.
Rendez-vous sur http://fr.yahoo.com/set
--
B e n j a m i n T h e r y - BULL/DT/Open Software R&D
http://www.bull.com
_______________________________________________
mipl mailing list
[email protected]
http://www.mobile-ipv6.org/cgi-bin/mailman/listinfo/mipl
