Hello,
I do not have a solution to your issues, but FYI I use the debian
distribution (testing/unstable) with both MIPL2 and NEPL with success.
Regards,
Romain
Buch-Pedersen, Leif wrote:
Benjamin,
I am very interested in your results of testing with the Debian distribution.
For your info:
I am using Debian stable (sarge). The kernel is native 2.6.15.6 from
kernel.org+the MIPL patch, built from scratch.
I have the same problems on Ubuntu 5.10, but as this is Debian based I am not
surprised.
Leif
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Benjamin Thery
Sent: Friday, 21 April, 2006 10:15
To: larafa sondes
Cc: [email protected]
Subject: Re: [mipl] Is it normal that the MN
Hey,
I had a look at some of the files.
There is something in mip6d.conf that seems wrong to me:
MnHomeLink "eth0" {
HomeAgentAddress 2001:660:3203:1012::beef;
HomeAddress 2001:660:3203:1016::5/64; }
Home Address and HomeAgentAddress should belong to the same
link: 2001:660:3203:1012::/64
HomeAddress should be 2001:660:3203:1012::5/64;
What I found strange in the ifconfig output, is that eth0 has
two auto-configured IPv6 global addresses: one for
2001:660:3203:1012::/64 and one for 2001:660:3203:1016::/64.
This is as if the MN received RA for both prefixes on the
foreign link.
If the address 2001:660:3203:1012:203:47ff:fefb:1fd is really
auto-configured, MN should have removed it when it moved to
the foreign link.
Last thing, you use a Debian distribution, so maybe you
encounter the same problem as Leif Buch-Pedersen describes on
the ML. He also have an issue with BUs not being sent.
I should install a Debian myself to check this.
Benjamin
larafa sondes wrote:
Hi,
Thank you very much for your attention on this problem.
--- Benjamin Thery <[EMAIL PROTECTED]> a écrit :
Can you send me your configurations files for both HA and MN?
mip6d.conf, ipsec configuration, radvd configuration.
I have not used IPsec yet.
I attached configuration files to this mail.
(May be you send them before but I couldn't find them in my email
archive) I'll have a look at it, and tell you if I see something
suspect ;)
Can you tell me which Linux distribution you use on both nodes?
FreeBSD 5.4 with kame/shisa for HA and Home Access Router (same
machine).
Debian with patched kernel 2.6.15 and mipv6-2.0.1 for MN.
Some more things that could help are:
- A trace of ifconfig on MN before you start mip6d.
I attached to this mail a screen snapshot of ifconfig.
- An ethereal capture on the MN for the following
events:
- unplug your MN interface
- start ethereal in promiscuous mode
- start mip6d on MN
- plug ethernet cable
- wait for while (ideally until the router sends a
RA)
- (or even better until HA sends the
BA)
- stop ethereal
- A trace of mip6d execution during the above operation.
I attached to this mail the screen snapshot of mip6d and
the ethereal
capture.
Hope I can help you
Thanks and regards,
Sondes
PS: theese attached file names mean:
-Debian etc_init.d_mipv6 stands for
/etc/init.d/mipv6 in Debian file system
-Debian_etc_mip6d.conf stands for /usr/local/etc/mip6d.conf in
Debian file system
-FreeBSD_etc_rc.conf stans for /etc/rc.conf in FreeBSd file
system
______________________________________________________________________
_____ Faites de Yahoo! votre page d'accueil sur le web pour
retrouver
directement vos services préférés : vérifiez vos nouveaux
mails, lancez vos recherches et suivez l'actualité en temps réel.
Rendez-vous sur http://fr.yahoo.com/set
--
B e n j a m i n T h e r y - BULL/DT/Open Software R&D
http://www.bull.com
_______________________________________________
mipl mailing list
[email protected]
http://www.mobile-ipv6.org/cgi-bin/mailman/listinfo/mipl
_______________________________________________
mipl mailing list
[email protected]
http://www.mobile-ipv6.org/cgi-bin/mailman/listinfo/mipl
--
Romain KUNTZ
[EMAIL PROTECTED]
_______________________________________________
mipl mailing list
[email protected]
http://www.mobile-ipv6.org/cgi-bin/mailman/listinfo/mipl
