Hi Bas and Nils, I think you are talking about below port: There is an hidden connection in the trendtac, which is an additional usb port. I have connected a usb connector + wifi stick to it. Used http://www.flickr.com/photos/trendtac/ pictures. if the uart+communication still works, then we do not need jtag, but can use telnet to hook up a console. Hook up a serial console via the battery compartment would be the same I would guess ? Hi Ard,
The cas-3plus costs 61.50 euro. I have no experience with this one, weird, well my cable tv is good enough ;-) It looks like it is equiped with 20 pins cable, jtag standard? For rs232 (hook up to serial console) we may use below one. http://nl.farnell.com/ftdi/usb-com232-plus-2/module-dev-usb-rs232-2-com-port/dp/1817171?in_merch=New Products&MER=i-9b10-00001144 Hi Nikolaus, I am looking forward to the results and documentation of your jtag setup. I have below questions with respect to jtag and jz4730: - Where to attach the jtag interface connections to the jz4730 (trendtac) ? Maybe the hidden usb port or ttyS0 serial port ? - What kind of Jtag access serial protocols/testmodes are needed for jz4730 (trendtac epc700) ? - do we need additional software for jtag communication to be able to program nandflash with uboot ? - Is there a possibility to 'heal' bad nand blocks via jtag commands ? Grt Ruben. > Date: Mon, 30 Aug 2010 12:34:13 +0200 > From: ard+mipsb...@kwaak.net > To: mipsbook-devel@linuxtogo.org > Subject: Re: [Mipsbook-devel] Unbrick > > On Mon, Aug 30, 2010 at 12:00:12PM +0200, Dr. H. Nikolaus Schaller wrote: > > You mean the 4-pin connector near a reset button? > > This is a RS232 console interface (needs a adapter). > > No, Bas has an epc-700... He means where the letux-400 has the > USB-wifi adapter connected :-). The epc-700 just has an empty usb > port there with no transistors on the place where the wifi power > is turned on/off. > > > Unfortunately, if U-Boot is damaged there is *only* JTAG remaining. I hope > > that I receive my adapter PCB today so that I can solder the connectors > > and connect it to the Openmoko Debug Board. Then, we will see... > > Still wondering: has anybody any experience with a duo-labs > CAS-3+? It should be usable as a jtag programmer. For some weird > reason I need to buy one. > > -- > .signature not found > > _______________________________________________ > Mipsbook-devel mailing list > Mipsbook-devel@linuxtogo.org > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/mipsbook-devel
_______________________________________________ Mipsbook-devel mailing list Mipsbook-devel@linuxtogo.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/mipsbook-devel
