On 02/14/11 21:12, Theo de Raadt wrote:
>> BSD.MP without ACPI does boot
> People should stop using this as a debugging technique.
>
> On almost all modern machines, acpi handling is *required*.
>
> Especially on something so new as your machine. Without the
> acpi handling, it *will* work worse. It is gauranteed.
>
> Please stop sending us reports about 'without acpi it works
> different'; it adds no information. Of course it works
> differently. I bet it works different if you don't power
> it on, too.
Ok. Lets take two.
I have upgraded to the latest snapshot. The single processor kernel
boots and runs fine. I have included a dmesg from it. When booting
from the multiprocessor kernel the last line displayed is:
mtrr: Pentium Pro MTRR support
-Bryan
OpenBSD 4.9-beta (GENERIC) #460: Fri Feb 11 16:49:13 MST 2011
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 3077259264 (2934MB)
avail mem = 2981351424 (2843MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xe0010 (44 entries)
bios0: vendor LENOVO version "6JET83WW (1.41 )" date 09/21/2010
bios0: LENOVO 2842K4U
acpi0 at bios0: rev 4
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP HPET MCFG APIC BOOT SLIC SSDT SSDT SSDT
acpi0: wakeup devices P0P2(S4) P0P1(S4) USB0(S3) USB1(S3) USB2(S3) USBR(S3)
EHC1(S3) USB3(S3) USB4(S3) USB5(S3) EHC2(S3) HDEF(S4) PXSX(S4) RP01(S4)
PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4) RP05(S4)
RP06(S4) BLAN(S4) LID_(S3) SLPB(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU T6670 @ 2.20GHz, 8120.07 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG
cpu0: 2MB 64b/line 8-way L2 cache
cpu0: apic clock running at 199MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P2)
acpiprt2 at acpi0: bus 9 (P0P1)
acpiprt3 at acpi0: bus 2 (RP01)
acpiprt4 at acpi0: bus 3 (RP02)
acpiprt5 at acpi0: bus 4 (RP03)
acpiprt6 at acpi0: bus 5 (RP04)
acpiprt7 at acpi0: bus 6 (RP05)
acpiprt8 at acpi0: bus 8 (RP06)
acpiec0 at acpi0
acpicpu0 at acpi0: C2, C1, PSS
acpitz0 at acpi0: critical temperature 105 degC
acpithinkpad0 at acpi0
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT1 model "42T4755" serial 1361 type LION oem "SONY"
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: PWRB
acpibtn2 at acpi0: SLPB
cpu0: Enhanced SpeedStep 8120 MHz: speeds: 2201, 2200, 1600, 1200 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1: apic 2 int 16 (irq 10)
drm0 at inteldrm0
"Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 16 (irq
10)
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 21 (irq
10)
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 19 (irq
10)
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 19 (irq
10)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: apic 2 int
22 (irq 10)
azalia0: codecs: Realtek ALC269, Intel/0x2802, using Realtek ALC269
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: apic 2 int 17 (irq
11)
pci1 at ppb0 bus 2
"JMicron SD/MMC" rev 0x20 at pci1 dev 0 function 0 not configured
sdhc0 at pci1 dev 0 function 2 "JMicron SD Host Controller" rev 0x20: apic 2
int 16 (irq 10)
sdmmc0 at sdhc0
"JMicron Memory Stick" rev 0x20 at pci1 dev 0 function 3 not configured
"JMicron xD" rev 0x20 at pci1 dev 0 function 4 not configured
ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: apic 2 int 16 (irq
10)
pci2 at ppb1 bus 3
ppb2 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x03: apic 2 int 18 (irq
10)
pci3 at ppb2 bus 4
ppb3 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: apic 2 int 19 (irq
10)
pci4 at ppb3 bus 5
iwn0 at pci4 dev 0 function 0 "Intel WiFi Link 1000" rev 0x00: apic 2 int 19
(irq 10), MIMO 1T2R, BGS, address 8c:a9:82:13:ed:66
ppb4 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: apic 2 int 17 (irq
11)
pci5 at ppb4 bus 6
ppb5 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x03: apic 2 int 16 (irq
10)
pci6 at ppb5 bus 8
re0 at pci6 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D (0x2800),
apic 2 int 17 (irq 11), address 60:eb:69:c4:1a:fd
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 23 (irq
10)
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 19 (irq
10)
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 18 (irq
10)
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 23 (irq
10)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb6 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
pci7 at ppb6 bus 9
pcib0 at pci0 dev 31 function 0 "Intel 82801IBM LPC" rev 0x03
ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: apic 2 int 19
(irq 10), AHCI 1.2
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0:<ATA, HITACHI HTS72505, PC4Z> SCSI3 0/direct fixed
sd0: 476940MB, 512 bytes/sec, 976773168 sec total
cd0 at scsibus0 targ 1 lun 0:<MATSHITA, DVD-RAM UJ890, SB31> ATAPI 5/cdrom
removable
ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 2 int 19
(irq 10)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-8500 SO-DIMM
spdmem1 at iic0 addr 0x52: 1GB DDR3 SDRAM PC3-8500 SO-DIMM
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
mtrr: Pentium Pro MTRR support
uvideo0 at uhub1 port 6 configuration 1 interface 0 "Bison Integrated Camera"
rev 2.00/0.06 addr 2
video0 at uvideo0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
