Hi, I'm using mISDN 1.1.5 with the lastest channel from beronet, Digium B410P and Asterisk 1.2.22. It working great with TE mode. I have testing the NT mode with same configuration but it seems it doesn't working. I have a strange results.
I have change the jumper on one card for NT mode and i have configure my /etc/mISDN.conf with mode="nt". On the asterisk CLI i saw my card is on NT mode for the first Asterisk and TE mode for the second. I'm using a standard RJ45 informatique cable. On my NT card my led is green and on the cli the misdn show stacks say all is good. But on the second the L1 is down and if i make a call i have no communication. Another thing it seems when i'm in NT mode, when i unload module the kernel freeze. It reproductible when i change parameters on the /etc/mISDN.conf when the module is started and i unload it. I use debian ETCH standard with kernel 2.6.18-4-686. Thanks for your help. Sylvain _______________________________________________ Misdn-asterisk mailing list [email protected] http://lists.beronet.com/cgi-bin/mailman/listinfo/misdn-asterisk
