Hi, I am using a Digium B410P card, but am experiencing strange issues. In this case I used Trixbox 2.2.3 as the starting point and then followed the instructions at http://drupal.trixbox.org/forums/trixbox-forums/trunks/howto-install-script-digium-b410p to install. After the issues mentioned below I have also tried the install-misdn-mqueue script directly, with the exact same results (as expected).
After installation all seems ok, but the following keep spamming on the console and is worrying me. Also, it seems to cause kernel panics after some time. Anyone know of a solution? hfcmulti_tx: fifo(4) has 383 bytes space left (z1=00fe, z2=00fe) sending 127 of 127 bytes TRANS hfcmulti_rx: fifo(4) reading 128 bytes (z1=0091, z2=0011) TRANS hfcmulti_tx: fifo(4) has 383 bytes space left (z1=017d, z2=017d) sending 113 of 113 bytes TRANS hfcmulti_rx: fifo(4) reading 128 bytes (z1=0111, z2=0091) TRANS Also, when loading the driver I see the following on screen: /sbin/rmmod hfcmulti Unknown line at line 5959 Unknown line at line 5960 Unknown line at line 5961 Unknown line at line 5962 Unknown line at line 5963 Unknown line at line 5964 Unknown line at line 5965 Unknown line at line 5966 Unknown line at line 5967 Unknown line at line 5968 Unknown line at line 5969 Unknown line at line 5970 ----------------------------------------- Loading module(s) for your misdn-cards: ----------------------------------------- /sbin/modprobe --ignore-install hfcmulti type=0x4 protocol=0x2,0x2,0x2,0x12 layermask=0xf,0xf,0xf,0x3 poll=128 debug=0xf /sbin/modprobe mISDN_dsp debug=0x0 options=0 Regards, Erwin
_______________________________________________ Misdn-asterisk mailing list [email protected] http://lists.beronet.com/cgi-bin/mailman/listinfo/misdn-asterisk
