Hi, we are using Beronet cards for the nt mode and it work ok. Without a sight of your configuration it's hard to say if there is a simple configuration error. Maybe you forgot to set the proper options in /etc/asterisk/misdn.conf ?
The module unload crashing was a known issue for quite some time in misdn. I thought it was fixed, maybe your not using the newest misdn version even if you think so but on the other hand i didn't check this behaviour for quite a time now, maybe it's still a issue. To your ppp tests. We tried to use capi mode as well but stop testing it after meeting numerous problems. We kicked PPP to work in using misdn via asterisk and app_pipe. g. Sven Am Samstag, den 28.07.2007, 10:14 +0200 schrieb Sylvain Boily: > Hi, > > I'm using mISDN 1.1.5 with the lastest channel from beronet, Digium > B410P and Asterisk 1.2.22. It working great with TE mode. I have testing > the NT mode with same configuration but it seems it doesn't working. I > have a strange results. > > I have change the jumper on one card for NT mode and i have configure > my /etc/mISDN.conf with mode="nt". On the asterisk CLI i saw my card is > on NT mode for the first Asterisk and TE mode for the second. I'm using > a standard RJ45 informatique cable. On my NT card my led is green and on > the cli the misdn show stacks say all is good. But on the second the L1 > is down and if i make a call i have no communication. > Another thing it seems when i'm in NT mode, when i unload module the > kernel freeze. It reproductible when i change parameters on > the /etc/mISDN.conf when the module is started and i unload it. > > I use debian ETCH standard with kernel 2.6.18-4-686. > > Thanks for your help. > Sylvain > > _______________________________________________ > Misdn-asterisk mailing list > [email protected] > http://lists.beronet.com/cgi-bin/mailman/listinfo/misdn-asterisk > _______________________________________________ Misdn-asterisk mailing list [email protected] http://lists.beronet.com/cgi-bin/mailman/listinfo/misdn-asterisk
