Hi, Le lundi 30 juillet 2007 à 12:02 +0200, Sven Hirschmüller a écrit : > Hi, > > we are using Beronet cards for the nt mode and it work ok. Without a > sight of your configuration it's hard to say if there is a simple > configuration error. Maybe you forgot to set the proper options > in /etc/asterisk/misdn.conf ?
After some research probably the cable is not ok, but i'm not sure, i test a new this afternoon. After this test i send you my configuration. > > The module unload crashing was a known issue for quite some time in > misdn. I thought it was fixed, maybe your not using the newest misdn > version even if you think so but on the other hand i didn't check this > behaviour for quite a time now, maybe it's still a issue. I have the latest stable 1.1.5 not latest GIT version. I do a test with latest version and i report an issue to the mISDN mantis if i have the same problem. > > To your ppp tests. We tried to use capi mode as well but stop testing it > after meeting numerous problems. We kicked PPP to work in using misdn > via asterisk and app_pipe. I haven't tested chan_capi and app_pipe. Just chan_misdn / app_pipe, chan_misdn / app_pppd, chan_capi / app_pppd. Thanks. Sylvain > > g. > Sven > > Am Samstag, den 28.07.2007, 10:14 +0200 schrieb Sylvain Boily: > > Hi, > > > > I'm using mISDN 1.1.5 with the lastest channel from beronet, Digium > > B410P and Asterisk 1.2.22. It working great with TE mode. I have testing > > the NT mode with same configuration but it seems it doesn't working. I > > have a strange results. > > > > I have change the jumper on one card for NT mode and i have configure > > my /etc/mISDN.conf with mode="nt". On the asterisk CLI i saw my card is > > on NT mode for the first Asterisk and TE mode for the second. I'm using > > a standard RJ45 informatique cable. On my NT card my led is green and on > > the cli the misdn show stacks say all is good. But on the second the L1 > > is down and if i make a call i have no communication. > > Another thing it seems when i'm in NT mode, when i unload module the > > kernel freeze. It reproductible when i change parameters on > > the /etc/mISDN.conf when the module is started and i unload it. > > > > I use debian ETCH standard with kernel 2.6.18-4-686. > > > > Thanks for your help. > > Sylvain > > > > _______________________________________________ > > Misdn-asterisk mailing list > > [email protected] > > http://lists.beronet.com/cgi-bin/mailman/listinfo/misdn-asterisk > > > > _______________________________________________ > Misdn-asterisk mailing list > [email protected] > http://lists.beronet.com/cgi-bin/mailman/listinfo/misdn-asterisk -- Sylvain BOILY Proformatique - 67 rue Voltaire - 92800 Puteaux Tel. : 01 41 38 99 64 - Fax. : 01 41 38 99 70 Email : [EMAIL PROTECTED] - http://proformatique.com/ "Vers un monde plus libre" ------------------------------------ Proformatique est membre de l'ASS2L http://www.ass2L.org _______________________________________________ Misdn-asterisk mailing list [email protected] http://lists.beronet.com/cgi-bin/mailman/listinfo/misdn-asterisk
