Dear Thank you for your Help. I tried to execute MainApp.exe passing Pic3D.pic.gz as parameter but I have always an exception and prorgamme exit.
I tried to debug it ==> the problem was in the procedure SampleApp: InitializeFunctionality () when it added dialog bars. How to solve this problem. Thank you in advance Regards. On Fri, 26 Sep 2008 16:00:15 +0200, "Wegner Ingmar" <[EMAIL PROTECTED]> wrote: > Hi Wassim, > sorry, the link for the documentation and tutorial is currently broken. > There you could see, how to activate and start the functionalities. > > For so long, use cmake to create your makefile or projectfile. There you > can activate QmitkVolumeVisualisation. After compiling the mitk source > code, you can start the MainApp in the build directory > <binary-files-directory>/mitk/bin/MainApp under gcc and > <binary-files-directory>/mitk/bin/release/debug/MainApp.exe on Win32 > systems. > > In the applcation, load an Image such as > <source-files-directory>/mitk/Testing/Data/Pic3D.pic.gz > Then click the icon for VolumeVisualization (stay with the mouse over the > icon to get the name / the icon shows three cubes (green, red, orange). > Then check the checkbox volume rendering in the control-section of the > functionality (on the right). > It takes a second to create a default lookup-table for opacity and color. > > In the lower right, you see the volume-renderes image. You can deactivate > the slices by clicking the green - red icon in the upper-middle; then you > see the whole volume-rendered image. > > In the control section, you see a histogram-widget (scalar opacity; blue) > and a line, which you can adapt by mouse-clicking. Add new points by > shift-left-mouse-click. There you get your desired lookup-table for > opacity, color (section below) and even gradient. > > > Best Regards and welcome to the MITK community, > Ingmar > > > -----Ursprüngliche Nachricht----- > Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > Gesendet: Freitag, 26. September 2008 13:43 > An: Wegner Ingmar > Cc: [email protected] > Betreff: Re: AW: [mitk-users] Using MITK to apply interactively change on > transfer function(Opacity + Color) on Volume Rendering > Wichtigkeit: Hoch > > > Hi > > I have great difficulties with the use of MITk especially > QmitkVolumeVisualization. > > I'am starting With MITK so please help me. > > I'll let the migration of QmitkVolumeVisualization control to Qt4 for > later. I downgrade momentarily to Qt3 > > I need to understand how I can use it !!!! Should I integer it in a Qt > widget? > > What are the steps To display a Volume and apply interactively change on > transfer function with this component ? > > I have not found documentaion that explains how to integrate or use this > component ... :-( > > Can you give me a piece of code? I would be very grateful ... > > Waiting for your feedback and help. > > Regards. > > > On Thu, 25 Sep 2008 18:20:23 +0200, "Wegner Ingmar" > <[EMAIL PROTECTED]> wrote: >> Hi Wassim, >> >> we are currently in a "pre-QT4-phase", meaning that we will soon (~2 >> month?) start to implement in QT4 only. >> We have several classes already written in QT4 ( see QT4 folders in > mitk >> source tree) but it will need more time. >> >>> How you can I proceed to port this functionality to Qt4? >>> Do you have an example (even written in Qt3) that uses this >> functionality? >> >> See the functionality mitk\QFunctionalities\QmitkVolumeVisualization. > It >> is written for QT3.x. >> An example of how QT4 funcktionalities will be written in future can be >> seen in mitk\Q4Applications\Tutorial >> >>>I did not understand how I can use "Volume Visualization Controls" >>>independently of Version of Qt. Can you explain ne please ???? >> >> In general MITK is GUI-independent. Sources, filters and mappers etc. > on >> top of ITK and VTK. Classes are marked with mitk-prefix. >> Then we have a lot of classes written for QT3 (Qmitk-prefix), some for > QT4 >> (will be extended) and even a few on Fltk to create an application. >> In future WXWidgets will be added from external developers of the MITK >> community (!very nice!, thanks), as I have heard. >> >> Best Regards, >> Ingmar >> >> -----Ursprüngliche Nachricht----- >> Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] >> Gesendet: Donnerstag, 25. September 2008 15:11 >> An: Wegner Ingmar >> Cc: [email protected] >> Betreff: Re: [mitk-users] Using MITK to apply interactively change on >> transfer function(Opacity + Color) on Volume Rendering >> Wichtigkeit: Hoch >> >> >> Hi >> >> Thank you very very much for your help. >> >> I can't downgrade to Qt3.6 because I have a project in which I am using >> Qt4. >> >> How you can I proceed to port this functionality to Qt4? >> >> Do you have an example (even written in Qt3) that uses this >> functionality? >> >> I did not understand how I can use "Volume Visualization Controls" >> independently of Version of Qt. Can you explain ne please ???? >> >> Waiting for your feedback and help. >> >> Regards. >> >> On Wed, 24 Sep 2008 17:58:16 +0200, "Wegner Ingmar" >> <[EMAIL PROTECTED]> wrote: >>> Hi Wassim, >>> if you would downgrade to Qt3.6 you could use the VolumeVisualization >>> functionality, which does exactly what you have described. >>> You can also use the QT/Win free library mentioned at >>> http://www.mitk.org/wiki/Build_requirements >>> >>> As far as I know, the functionality is not yet ported to QT4. But if >> you >>> want to port it you are more than welcome to do so and to provide the >> code >>> for the others. If you know QT4.0 it should not be too much work. >>> >>> Best regards, >>> Ingmar >>> >>> >>> -----Ursprüngliche Nachricht----- >>> Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] >>> Gesendet: Mittwoch, 24. September 2008 14:36 >>> An: [email protected] >>> Betreff: [mitk-users] Using MITK to apply interactively change on >> transfer >>> function(Opacity + Color) on Volume Rendering >>> Wichtigkeit: Hoch >>> >>> >>> Dear >>> >>> I'am using VTK 5.0.2 and Qt 4.3.1 for Volume Rendering. >>> >>> I want to use MITK to apply interactively change on transfer >>> function(Opacity + Color). >>> >>> VTK doesn't offers methode to do this kind of interaction on Volume >>> Rendering. >>> >>> What I want is interact with the volume (to disappear/ display parts > of >>> volume: bones, vessels ...) by varying the functions of transfer. >>> >>> Is it possible using MITK + VTK 5.0.2 and Qt 4.3.1 ? >>> >>> If it is yes so : >>> >>> 1) How can i use MITK to do this ? >>> >>> 2) Is there an example that I can follow because I'm starting >> with >>> MITK (I did not find in the tutorial of MITK an example like what I'm >>> looking for). >>> >>> I have already compiled MITK using Qt 4 as GUI + VTK 5.0.2 and ITK >> 3.8.0 >> . >>> >>> >>> Waiting for your feedback and help. >>> >>> I'am on a trouble so please Help. >>> >>> Regards. >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >> > ------------------------------------------------------------------------- >>> This SF.Net email is sponsored by the Moblin Your Move Developer's >>> challenge >>> Build the coolest Linux based applications with Moblin SDK & win great >>> prizes >>> Grand prize is a trip for two to an Open Source event anywhere in the >>> world >>> http://moblin-contest.org/redirect.php?banner_id=100&url=/ >>> _______________________________________________ >>> mitk-users mailing list >>> [email protected] >>> https://lists.sourceforge.net/lists/listinfo/mitk-users >> >> >> > ------------------------------------------------------------------------- >> This SF.Net email is sponsored by the Moblin Your Move Developer's >> challenge >> Build the coolest Linux based applications with Moblin SDK & win great >> prizes >> Grand prize is a trip for two to an Open Source event anywhere in the >> world >> http://moblin-contest.org/redirect.php?banner_id=100&url=/ >> _______________________________________________ >> mitk-users mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/mitk-users >> > > ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ mitk-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/mitk-users
