Hi, QT 3.3.8. seems different, but doesn't have to be the cause of the segmentation fault.
Could you compile it with debug information and send the call-stack? Did you set all necessary environment variables in XP? Regards, Ingmar Dipl.-Inform. Med. Ingmar Wegner DKFZ German Cancer Research Center (Deutsches Krebsforschungszentrum) Member of the Helmholtz Association Division Medical and Biological Informatics E130 Im Neuenheimer Feld 280 D-69120 Heidelberg Phone: 49-(0)6221-42-3543 Fax: 49-(0)6221-42-2345 E-Mail: [EMAIL PROTECTED] Web: www.dkfz.de Confidentiality Note: This message is intended only for the use of the named recipient(s) and may obtain confidential and/or privileged information. If you are not the intended recipient, please contact the sender and delete the message. Any unauthorized use of the information contained in this message is prohibited. -----Ursprüngliche Nachricht----- Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Gesendet: Dienstag, 30. September 2008 08:18 An: Wegner Ingmar Cc: [email protected] Betreff: Re: AW: AW: AW: AW: [mitk-users] Using MITK to apply interactively change on transfer function(Opacity + Color) on Volume Rendering Wichtigkeit: Hoch Hi I am using VTK 5.0.2, ITK 3.8.0 and Qt 3.3.8 I use Microsoft Visual Studio 2005 as Compiler. I checked the VTK flags and I followed all the instructions to build Solution. Cmake has not generated errors and build solution succeeded. I am using Windows XP SP2 as operation system. Waiting for your feedback and help. Thank you in adance Best Regards. On Mon, 29 Sep 2008 16:48:04 +0200, "Wegner Ingmar" <[EMAIL PROTECTED]> wrote: > To help you I need some more information: > You are using VTK 5.0.2? > Which ITK version? > Which compiler? > QT 3.3.6? > Did you check the cmake flags for VTK? > See http://www.mitk.org/wiki/Build_requirements. > Cmake generated the project with no problems? > Which operation system? > > Best Regards, > Ingmar > > > Dipl.-Inform. Med. Ingmar Wegner > DKFZ > German Cancer Research Center (Deutsches Krebsforschungszentrum) > Member of the Helmholtz Association > Division Medical and Biological Informatics E130 > Im Neuenheimer Feld 280 > D-69120 Heidelberg > Phone: 49-(0)6221-42-3543 > Fax: 49-(0)6221-42-2345 > E-Mail: [EMAIL PROTECTED] > Web: www.dkfz.de > > Confidentiality Note: This message is intended only for the use of the > named recipient(s) and may obtain confidential and/or privileged > information. If you are not the intended recipient, please contact the > sender and delete the message. Any unauthorized use of the information > contained in this message is prohibited. > > > -----Ursprüngliche Nachricht----- > Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > Gesendet: Montag, 29. September 2008 15:55 > An: Wegner Ingmar > Cc: [email protected] > Betreff: Re: AW: AW: AW: [mitk-users] Using MITK to apply interactively > change on transfer function(Opacity + Color) on Volume Rendering > Wichtigkeit: Hoch > > > > Hi > > I compiled the the current version of the svn repository. > > I have always an exception and prorgamme exit even if I do not pass the > image as an argument. > > I did not understand the origin of the error... > > Thank ou in advance > > Best Regards. > > > > On Mon, 29 Sep 2008 15:35:36 +0200, "Wegner Ingmar" > <[EMAIL PROTECTED]> wrote: >> Dear Wassim, >> the documentation finally is up again. >> See http://www.mitk.org/wiki/Documentation for current and older > versions >> of documentation. >> >> For the error, please check http://www.mitk.org/wiki/Development if you >> have configured everything right. >> >> Can you start the application without the argument (image)? >> >> You can load the image with the typical load button in the upper left > or >> by menu / file / open. You can even drag&drop the file into the > MainApp. >> Did you compile the current version of the svn repository or did you > adapt >> some functionality classes? >> >> Best Regards, >> Ingmar >> >> >> >> Dipl.-Inform. Med. Ingmar Wegner >> DKFZ >> German Cancer Research Center (Deutsches Krebsforschungszentrum) >> Member of the Helmholtz Association >> Division Medical and Biological Informatics E130 >> Im Neuenheimer Feld 280 >> D-69120 Heidelberg >> Phone: 49-(0)6221-42-3543 >> Fax: 49-(0)6221-42-2345 >> E-Mail: [EMAIL PROTECTED] >> Web: www.dkfz.de >> >> Confidentiality Note: This message is intended only for the use of the >> named recipient(s) and may obtain confidential and/or privileged >> information. If you are not the intended recipient, please contact the >> sender and delete the message. Any unauthorized use of the information >> contained in this message is prohibited. >> >> >> -----Ursprüngliche Nachricht----- >> Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] >> Gesendet: Montag, 29. September 2008 11:45 >> An: Wegner Ingmar >> Cc: [email protected] >> Betreff: Re: AW: AW: [mitk-users] Using MITK to apply interactively > change >> on transfer function(Opacity + Color) on Volume Rendering >> Wichtigkeit: Hoch >> >> >> Dear >> >> Thank you for your Help. >> >> I tried to execute MainApp.exe passing Pic3D.pic.gz as parameter > but >> I >> have always an exception and prorgamme exit. >> >> I tried to debug it ==> the problem was in the procedure SampleApp: >> InitializeFunctionality () when it added dialog bars. >> >> How to solve this problem. >> >> Thank you in advance >> >> Regards. >> >> >> On Fri, 26 Sep 2008 16:00:15 +0200, "Wegner Ingmar" >> <[EMAIL PROTECTED]> wrote: >>> Hi Wassim, >>> sorry, the link for the documentation and tutorial is currently > broken. >>> There you could see, how to activate and start the functionalities. >>> >>> For so long, use cmake to create your makefile or projectfile. There >> you >>> can activate QmitkVolumeVisualisation. After compiling the mitk source >>> code, you can start the MainApp in the build directory >>> <binary-files-directory>/mitk/bin/MainApp under gcc and >>> <binary-files-directory>/mitk/bin/release/debug/MainApp.exe on Win32 >>> systems. >>> >>> In the applcation, load an Image such as >>> <source-files-directory>/mitk/Testing/Data/Pic3D.pic.gz >>> Then click the icon for VolumeVisualization (stay with the mouse over >> the >>> icon to get the name / the icon shows three cubes (green, red, > orange). >>> Then check the checkbox volume rendering in the control-section of the >>> functionality (on the right). >>> It takes a second to create a default lookup-table for opacity and >> color. >>> >>> In the lower right, you see the volume-renderes image. You can >> deactivate >>> the slices by clicking the green - red icon in the upper-middle; then >> you >>> see the whole volume-rendered image. >>> >>> In the control section, you see a histogram-widget (scalar opacity; >> blue) >>> and a line, which you can adapt by mouse-clicking. Add new points by >>> shift-left-mouse-click. There you get your desired lookup-table for >>> opacity, color (section below) and even gradient. >>> >>> >>> Best Regards and welcome to the MITK community, >>> Ingmar >>> >>> >>> -----Ursprüngliche Nachricht----- >>> Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] >>> Gesendet: Freitag, 26. September 2008 13:43 >>> An: Wegner Ingmar >>> Cc: [email protected] >>> Betreff: Re: AW: [mitk-users] Using MITK to apply interactively change >> on >>> transfer function(Opacity + Color) on Volume Rendering >>> Wichtigkeit: Hoch >>> >>> >>> Hi >>> >>> I have great difficulties with the use of MITk especially >>> QmitkVolumeVisualization. >>> >>> I'am starting With MITK so please help me. >>> >>> I'll let the migration of QmitkVolumeVisualization control to Qt4 for >>> later. I downgrade momentarily to Qt3 >>> >>> I need to understand how I can use it !!!! Should I integer it in a Qt >>> widget? >>> >>> What are the steps To display a Volume and apply interactively change >> on >>> transfer function with this component ? >>> >>> I have not found documentaion that explains how to integrate or use >> this >>> component ... :-( >>> >>> Can you give me a piece of code? I would be very grateful ... >>> >>> Waiting for your feedback and help. >>> >>> Regards. >>> >>> >>> On Thu, 25 Sep 2008 18:20:23 +0200, "Wegner Ingmar" >>> <[EMAIL PROTECTED]> wrote: >>>> Hi Wassim, >>>> >>>> we are currently in a "pre-QT4-phase", meaning that we will soon (~2 >>>> month?) start to implement in QT4 only. >>>> We have several classes already written in QT4 ( see QT4 folders in >>> mitk >>>> source tree) but it will need more time. >>>> >>>>> How you can I proceed to port this functionality to Qt4? >>>>> Do you have an example (even written in Qt3) that uses this >>>> functionality? >>>> >>>> See the functionality mitk\QFunctionalities\QmitkVolumeVisualization. >>> It >>>> is written for QT3.x. >>>> An example of how QT4 funcktionalities will be written in future can >> be >>>> seen in mitk\Q4Applications\Tutorial >>>> >>>>>I did not understand how I can use "Volume Visualization Controls" >>>>>independently of Version of Qt. Can you explain ne please ???? >>>> >>>> In general MITK is GUI-independent. Sources, filters and mappers etc. >>> on >>>> top of ITK and VTK. Classes are marked with mitk-prefix. >>>> Then we have a lot of classes written for QT3 (Qmitk-prefix), some > for >>> QT4 >>>> (will be extended) and even a few on Fltk to create an application. >>>> In future WXWidgets will be added from external developers of the > MITK >>>> community (!very nice!, thanks), as I have heard. >>>> >>>> Best Regards, >>>> Ingmar >>>> >>>> -----Ursprüngliche Nachricht----- >>>> Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] >>>> Gesendet: Donnerstag, 25. September 2008 15:11 >>>> An: Wegner Ingmar >>>> Cc: [email protected] >>>> Betreff: Re: [mitk-users] Using MITK to apply interactively change on >>>> transfer function(Opacity + Color) on Volume Rendering >>>> Wichtigkeit: Hoch >>>> >>>> >>>> Hi >>>> >>>> Thank you very very much for your help. >>>> >>>> I can't downgrade to Qt3.6 because I have a project in which I am >> using >>>> Qt4. >>>> >>>> How you can I proceed to port this functionality to Qt4? >>>> >>>> Do you have an example (even written in Qt3) that uses this >>>> functionality? >>>> >>>> I did not understand how I can use "Volume Visualization Controls" >>>> independently of Version of Qt. Can you explain ne please ???? >>>> >>>> Waiting for your feedback and help. >>>> >>>> Regards. >>>> >>>> On Wed, 24 Sep 2008 17:58:16 +0200, "Wegner Ingmar" >>>> <[EMAIL PROTECTED]> wrote: >>>>> Hi Wassim, >>>>> if you would downgrade to Qt3.6 you could use the > VolumeVisualization >>>>> functionality, which does exactly what you have described. >>>>> You can also use the QT/Win free library mentioned at >>>>> http://www.mitk.org/wiki/Build_requirements >>>>> >>>>> As far as I know, the functionality is not yet ported to QT4. But if >>>> you >>>>> want to port it you are more than welcome to do so and to provide > the >>>> code >>>>> for the others. If you know QT4.0 it should not be too much work. >>>>> >>>>> Best regards, >>>>> Ingmar >>>>> >>>>> >>>>> -----Ursprüngliche Nachricht----- >>>>> Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] >>>>> Gesendet: Mittwoch, 24. September 2008 14:36 >>>>> An: [email protected] >>>>> Betreff: [mitk-users] Using MITK to apply interactively change on >>>> transfer >>>>> function(Opacity + Color) on Volume Rendering >>>>> Wichtigkeit: Hoch >>>>> >>>>> >>>>> Dear >>>>> >>>>> I'am using VTK 5.0.2 and Qt 4.3.1 for Volume Rendering. >>>>> >>>>> I want to use MITK to apply interactively change on transfer >>>>> function(Opacity + Color). >>>>> >>>>> VTK doesn't offers methode to do this kind of interaction on Volume >>>>> Rendering. >>>>> >>>>> What I want is interact with the volume (to disappear/ display parts >>> of >>>>> volume: bones, vessels ...) by varying the functions of transfer. >>>>> >>>>> Is it possible using MITK + VTK 5.0.2 and Qt 4.3.1 ? >>>>> >>>>> If it is yes so : >>>>> >>>>> 1) How can i use MITK to do this ? >>>>> >>>>> 2) Is there an example that I can follow because I'm starting >>>> with >>>>> MITK (I did not find in the tutorial of MITK an example like what >> I'm >>>>> looking for). >>>>> >>>>> I have already compiled MITK using Qt 4 as GUI + VTK 5.0.2 and ITK >>>> 3.8.0 >>>> . >>>>> >>>>> >>>>> Waiting for your feedback and help. >>>>> >>>>> I'am on a trouble so please Help. >>>>> >>>>> Regards. >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>> >>> >> > ------------------------------------------------------------------------- >>>>> This SF.Net email is sponsored by the Moblin Your Move Developer's >>>>> challenge >>>>> Build the coolest Linux based applications with Moblin SDK & win >> great >>>>> prizes >>>>> Grand prize is a trip for two to an Open Source event anywhere in > the >>>>> world >>>>> http://moblin-contest.org/redirect.php?banner_id=100&url=/ >>>>> _______________________________________________ >>>>> mitk-users mailing list >>>>> [email protected] >>>>> https://lists.sourceforge.net/lists/listinfo/mitk-users >>>> >>>> >>>> >>> >> > ------------------------------------------------------------------------- >>>> This SF.Net email is sponsored by the Moblin Your Move Developer's >>>> challenge >>>> Build the coolest Linux based applications with Moblin SDK & win > great >>>> prizes >>>> Grand prize is a trip for two to an Open Source event anywhere in the >>>> world >>>> http://moblin-contest.org/redirect.php?banner_id=100&url=/ >>>> _______________________________________________ >>>> mitk-users mailing list >>>> [email protected] >>>> https://lists.sourceforge.net/lists/listinfo/mitk-users >>>> >>> >>> >> >> > > ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ mitk-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/mitk-users
