Hi
I compiled the the current version of the svn repository. I have always an exception and prorgamme exit even if I do not pass the image as an argument. I did not understand the origin of the error... Thank ou in advance Best Regards. On Mon, 29 Sep 2008 15:35:36 +0200, "Wegner Ingmar" <[EMAIL PROTECTED]> wrote: > Dear Wassim, > the documentation finally is up again. > See http://www.mitk.org/wiki/Documentation for current and older versions > of documentation. > > For the error, please check http://www.mitk.org/wiki/Development if you > have configured everything right. > > Can you start the application without the argument (image)? > > You can load the image with the typical load button in the upper left or > by menu / file / open. You can even drag&drop the file into the MainApp. > Did you compile the current version of the svn repository or did you adapt > some functionality classes? > > Best Regards, > Ingmar > > > > Dipl.-Inform. Med. Ingmar Wegner > DKFZ > German Cancer Research Center (Deutsches Krebsforschungszentrum) > Member of the Helmholtz Association > Division Medical and Biological Informatics E130 > Im Neuenheimer Feld 280 > D-69120 Heidelberg > Phone: 49-(0)6221-42-3543 > Fax: 49-(0)6221-42-2345 > E-Mail: [EMAIL PROTECTED] > Web: www.dkfz.de > > Confidentiality Note: This message is intended only for the use of the > named recipient(s) and may obtain confidential and/or privileged > information. If you are not the intended recipient, please contact the > sender and delete the message. Any unauthorized use of the information > contained in this message is prohibited. > > > -----Ursprüngliche Nachricht----- > Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > Gesendet: Montag, 29. September 2008 11:45 > An: Wegner Ingmar > Cc: [email protected] > Betreff: Re: AW: AW: [mitk-users] Using MITK to apply interactively change > on transfer function(Opacity + Color) on Volume Rendering > Wichtigkeit: Hoch > > > Dear > > Thank you for your Help. > > I tried to execute MainApp.exe passing Pic3D.pic.gz as parameter but > I > have always an exception and prorgamme exit. > > I tried to debug it ==> the problem was in the procedure SampleApp: > InitializeFunctionality () when it added dialog bars. > > How to solve this problem. > > Thank you in advance > > Regards. > > > On Fri, 26 Sep 2008 16:00:15 +0200, "Wegner Ingmar" > <[EMAIL PROTECTED]> wrote: >> Hi Wassim, >> sorry, the link for the documentation and tutorial is currently broken. >> There you could see, how to activate and start the functionalities. >> >> For so long, use cmake to create your makefile or projectfile. There > you >> can activate QmitkVolumeVisualisation. After compiling the mitk source >> code, you can start the MainApp in the build directory >> <binary-files-directory>/mitk/bin/MainApp under gcc and >> <binary-files-directory>/mitk/bin/release/debug/MainApp.exe on Win32 >> systems. >> >> In the applcation, load an Image such as >> <source-files-directory>/mitk/Testing/Data/Pic3D.pic.gz >> Then click the icon for VolumeVisualization (stay with the mouse over > the >> icon to get the name / the icon shows three cubes (green, red, orange). >> Then check the checkbox volume rendering in the control-section of the >> functionality (on the right). >> It takes a second to create a default lookup-table for opacity and > color. >> >> In the lower right, you see the volume-renderes image. You can > deactivate >> the slices by clicking the green - red icon in the upper-middle; then > you >> see the whole volume-rendered image. >> >> In the control section, you see a histogram-widget (scalar opacity; > blue) >> and a line, which you can adapt by mouse-clicking. Add new points by >> shift-left-mouse-click. There you get your desired lookup-table for >> opacity, color (section below) and even gradient. >> >> >> Best Regards and welcome to the MITK community, >> Ingmar >> >> >> -----Ursprüngliche Nachricht----- >> Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] >> Gesendet: Freitag, 26. September 2008 13:43 >> An: Wegner Ingmar >> Cc: [email protected] >> Betreff: Re: AW: [mitk-users] Using MITK to apply interactively change > on >> transfer function(Opacity + Color) on Volume Rendering >> Wichtigkeit: Hoch >> >> >> Hi >> >> I have great difficulties with the use of MITk especially >> QmitkVolumeVisualization. >> >> I'am starting With MITK so please help me. >> >> I'll let the migration of QmitkVolumeVisualization control to Qt4 for >> later. I downgrade momentarily to Qt3 >> >> I need to understand how I can use it !!!! Should I integer it in a Qt >> widget? >> >> What are the steps To display a Volume and apply interactively change > on >> transfer function with this component ? >> >> I have not found documentaion that explains how to integrate or use > this >> component ... :-( >> >> Can you give me a piece of code? I would be very grateful ... >> >> Waiting for your feedback and help. >> >> Regards. >> >> >> On Thu, 25 Sep 2008 18:20:23 +0200, "Wegner Ingmar" >> <[EMAIL PROTECTED]> wrote: >>> Hi Wassim, >>> >>> we are currently in a "pre-QT4-phase", meaning that we will soon (~2 >>> month?) start to implement in QT4 only. >>> We have several classes already written in QT4 ( see QT4 folders in >> mitk >>> source tree) but it will need more time. >>> >>>> How you can I proceed to port this functionality to Qt4? >>>> Do you have an example (even written in Qt3) that uses this >>> functionality? >>> >>> See the functionality mitk\QFunctionalities\QmitkVolumeVisualization. >> It >>> is written for QT3.x. >>> An example of how QT4 funcktionalities will be written in future can > be >>> seen in mitk\Q4Applications\Tutorial >>> >>>>I did not understand how I can use "Volume Visualization Controls" >>>>independently of Version of Qt. Can you explain ne please ???? >>> >>> In general MITK is GUI-independent. Sources, filters and mappers etc. >> on >>> top of ITK and VTK. Classes are marked with mitk-prefix. >>> Then we have a lot of classes written for QT3 (Qmitk-prefix), some for >> QT4 >>> (will be extended) and even a few on Fltk to create an application. >>> In future WXWidgets will be added from external developers of the MITK >>> community (!very nice!, thanks), as I have heard. >>> >>> Best Regards, >>> Ingmar >>> >>> -----Ursprüngliche Nachricht----- >>> Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] >>> Gesendet: Donnerstag, 25. September 2008 15:11 >>> An: Wegner Ingmar >>> Cc: [email protected] >>> Betreff: Re: [mitk-users] Using MITK to apply interactively change on >>> transfer function(Opacity + Color) on Volume Rendering >>> Wichtigkeit: Hoch >>> >>> >>> Hi >>> >>> Thank you very very much for your help. >>> >>> I can't downgrade to Qt3.6 because I have a project in which I am > using >>> Qt4. >>> >>> How you can I proceed to port this functionality to Qt4? >>> >>> Do you have an example (even written in Qt3) that uses this >>> functionality? >>> >>> I did not understand how I can use "Volume Visualization Controls" >>> independently of Version of Qt. Can you explain ne please ???? >>> >>> Waiting for your feedback and help. >>> >>> Regards. >>> >>> On Wed, 24 Sep 2008 17:58:16 +0200, "Wegner Ingmar" >>> <[EMAIL PROTECTED]> wrote: >>>> Hi Wassim, >>>> if you would downgrade to Qt3.6 you could use the VolumeVisualization >>>> functionality, which does exactly what you have described. >>>> You can also use the QT/Win free library mentioned at >>>> http://www.mitk.org/wiki/Build_requirements >>>> >>>> As far as I know, the functionality is not yet ported to QT4. But if >>> you >>>> want to port it you are more than welcome to do so and to provide the >>> code >>>> for the others. If you know QT4.0 it should not be too much work. >>>> >>>> Best regards, >>>> Ingmar >>>> >>>> >>>> -----Ursprüngliche Nachricht----- >>>> Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] >>>> Gesendet: Mittwoch, 24. September 2008 14:36 >>>> An: [email protected] >>>> Betreff: [mitk-users] Using MITK to apply interactively change on >>> transfer >>>> function(Opacity + Color) on Volume Rendering >>>> Wichtigkeit: Hoch >>>> >>>> >>>> Dear >>>> >>>> I'am using VTK 5.0.2 and Qt 4.3.1 for Volume Rendering. >>>> >>>> I want to use MITK to apply interactively change on transfer >>>> function(Opacity + Color). >>>> >>>> VTK doesn't offers methode to do this kind of interaction on Volume >>>> Rendering. >>>> >>>> What I want is interact with the volume (to disappear/ display parts >> of >>>> volume: bones, vessels ...) by varying the functions of transfer. >>>> >>>> Is it possible using MITK + VTK 5.0.2 and Qt 4.3.1 ? >>>> >>>> If it is yes so : >>>> >>>> 1) How can i use MITK to do this ? >>>> >>>> 2) Is there an example that I can follow because I'm starting >>> with >>>> MITK (I did not find in the tutorial of MITK an example like what > I'm >>>> looking for). >>>> >>>> I have already compiled MITK using Qt 4 as GUI + VTK 5.0.2 and ITK >>> 3.8.0 >>> . >>>> >>>> >>>> Waiting for your feedback and help. >>>> >>>> I'am on a trouble so please Help. >>>> >>>> Regards. >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>> >> > ------------------------------------------------------------------------- >>>> This SF.Net email is sponsored by the Moblin Your Move Developer's >>>> challenge >>>> Build the coolest Linux based applications with Moblin SDK & win > great >>>> prizes >>>> Grand prize is a trip for two to an Open Source event anywhere in the >>>> world >>>> http://moblin-contest.org/redirect.php?banner_id=100&url=/ >>>> _______________________________________________ >>>> mitk-users mailing list >>>> [email protected] >>>> https://lists.sourceforge.net/lists/listinfo/mitk-users >>> >>> >>> >> > ------------------------------------------------------------------------- >>> This SF.Net email is sponsored by the Moblin Your Move Developer's >>> challenge >>> Build the coolest Linux based applications with Moblin SDK & win great >>> prizes >>> Grand prize is a trip for two to an Open Source event anywhere in the >>> world >>> http://moblin-contest.org/redirect.php?banner_id=100&url=/ >>> _______________________________________________ >>> mitk-users mailing list >>> [email protected] >>> https://lists.sourceforge.net/lists/listinfo/mitk-users >>> >> >> > > ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ mitk-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/mitk-users
