At 12:19 PM 5/17/01 -0700, Mark Stanton wrote:
>Would I be wrong to suggest that the actual PITA here is not lining up
>the subframe with the frame but getting the metal sleeve in the bushing
>itself lined up with the subframe and frame?
You're right. Also remember that aftermarket poly (and delrin, I assume)
bushings are considerably thicker than the stock bushings, so getting the
control arm back in is a bitch unless you make lots of room by dropping the
subframe down even farther, which just worsens the subframe shifting problem.
**************
Patrick Austin
[email protected]
(617)782-9115
**************
_____________
List Sponsor: http://www.netsville.com
To remove yourself from this list, send mail to [email protected] with
'unsubscribe a2_16v' in the body of your message
See us on the web at http://www.a2-16v.com
Visit the 16V Homepage at http://www.gti16v.org
