On Thu, 7 Jun 2001, jimvish wrote: > All Motronic guys: > > What color are the plugs for your idle stabilizer valve and 5th injector? > The ISV plug is black and the 5th injector plug is grey, correct? The car > will not start with the 5th injector plugged in because it's flooding the > motor with fuel. I measured 13.5 volts to the 5th injector on cold startup > and after warming up the car. The car will run no differently if I plug the > 5th injector in after starting the car. Does Motronic use the 5th injector > for enrichment or only cold starts? >
Only on cold starts. If your thermo-time switch is bad, it could be telling your car that it's -400 degrees out, causing it to try to give you a little TOO much enrichment. :) . If you have the bentley, follow the instructions in there for testing the thermo-time switch. _____________ List Sponsor: http://www.netsville.com To remove yourself from this list, send mail to [email protected] with 'unsubscribe a2_16v' in the body of your message See us on the web at http://www.a2-16v.com Visit the 16V Homepage at http://www.gti16v.org
