-----Original Message----- From: [email protected] [mailto:[email protected]] Sent: Friday, July 20, 2001 5:49 PM Cc: [email protected] Subject: Re: Agressive Cams?
I disagree....to a point. Yes big cams will allow too much overlap causing blow thru BUT that is only when not tuned properly on a 16v. On an 8v you cant do anything about it, but on a 16v you can install and adjust adjustable cam chain sprockets indiviually to allow you to dial out overlap while still taking advantage of the higher lift cams. >>> absolutely right, but if you do go this way be super careful and do the silly putty thing before you run it as its really easy to put a valve into the piston toop when moving them individually... -Drew _____________ List Sponsor: http://www.netsville.com To remove yourself from this list, send mail to [email protected] with 'unsubscribe a2_16v' in the body of your message See us on the web at http://www.a2-16v.com Visit the 16V Homepage at http://www.gti16v.org _____________ List Sponsor: http://www.netsville.com To remove yourself from this list, send mail to [email protected] with 'unsubscribe a2_16v' in the body of your message See us on the web at http://www.a2-16v.com Visit the 16V Homepage at http://www.gti16v.org
